- Release on :2017-02-09
If you need watch different program, then you need two satellite receiver and two tv, one sets HDMI or RCA/AV port wireless av transmitter and receiver for one satellite receiver and tv. Besides, the two sets tv shouldn’t be much too closely, or it will cause interference. If you will adapt this plan, please choose two sets audio/videowireless tv sender with different frequency band, one sets 2.4GHz frequency and another one 5.8GHz frequency band for avoid interference.
Next:PAT-580 HDMI video transceiver/extender Review
- Release on :2017-01-12
PAT-580 is new reach of PAKITE Technology, it’s a favorable products for those HDMI user.
PAT-580 Transmitter support 480P,576P,720P,1080I,1080P@60Hz as input resolution. At transmitter end, there is one group HDMI input and one group HDMI output. The HDMI input group is for connect DVDor other signal source with transmitter, the HDMI output group is forconnect with TV directly. Which means one transmitter and one receiver support connect with two sets tv.
PAT-580 Receiver support 576P resolution as output resolution, whatever input resolution is 720P or 1080P, the receiver will automatic change the output resolution as 576P. The receiver should be placed at within 10-15 meters after passed one wall, or it will cause unstable transmission.
PAT-580 HDMI av sender is stand at the mid side between RCA Jack av sender with 480P resolution and HDMI Jack av sender with 1080P resolution. It’s function still keep the RCA one, like one transmitter and many receivers, like 300 Meter long range transmission.
Next:IR Extender Wire or Wireless
IR Extender Wire or Wireless
- Release on :2017-04-27
All kinds of product crowd in market, but wireless had been the major trend, but some of their are conditioned to wire product.
So any difference between wire and wireless? Here take example by IR Extender.The picture is wireless IR Extender. One set ir extender contain a wireless transmitter and a wireless receiver, what the difference between this device withwireless tv transmitter is ir extender just for extending the ir signal wirelessly. This unit no need to connect with any device by cable except plug, so it can be used with USD/HDMI/RCA/SDI.....any type of device. Just place the receiver at the signal source need to be extension, and remote control at transmitter end. Transmission range up to 200 meter at open space.The picture is wire IR Extender, this unit need to connect with tv or set top box by USB cable, but it just for getting power, also it could be connected with Plug for getting power. But please noticed: the small one dot is receiver and the big one is transmitter. Use method: USB Jack connect with Set Top Box for getting power, and the receiver dot stick at the set top box end, remote control the transmitter dot.As for wireless IR Extender, between transmitter and receiver the distance could be 200meter, but wire IR Extender distance is limit since the cable, so it’s depends on your requirements and installation method.Previous:Take you to understand PAT-580
Next:300m HDMI signal AV Wireless Transmitter and Receiver
PAT-580 Wireless HDMI Video Transmitter/Extender Review
- Author:From network
- Release on :2017-04-21
Our company purchased 300 set PAKITE brand wireless hdmi av sendertransmitters and receivers Model PAT-580 at the end of 2016 from Pakite company, we saw benefits from Pakite technology company's experience, low repair rate, service and the price. And it is the only one developer and manufacturer of this 300m hdmi extender. As we got a good sales and a low repair rate, we decided to give a good review to this new product. Because we got good reviews from our customers too.
PAT-580 Reviews from our customers
All of our customers' reviews are accept this hdmi extender output resolution is 720*576p(And we had told them about this before they bought), and as a matter of fact, the image quality is okay for room to room wireless transmission.
After customer bought this wireless hdmi video transmitter receiver and used it on their hdmi device, most of general problem they met is how to connect the transmitter and receiver and how to place them. This is not a problem for us, and we gave them help, the problem is resolved quickly. Some customers can correct connected and placed them well by watching the installation video on youtube.
Review of their using device: the signal source device which they used is, blu-ray player, DVD player, set-top box(cable box), satellite, IPTV box, and the hdmi video extender can work well. But there is one customer said his blu-ray player can't work with this hdmi extender, the reason came out, his blu-ray's version is too old to work well with this extender. We suggested him to change a new blu-ray player.
And recently, our company purchased 500 set PAKITE brand hdmi extender from Pakite company again.Source: PAT-580 Wireless HDMI video transmitter/extender reviewPrevious:How can I watch difference channels by audio/video transmitter receiver?
Next:What is RCA Jack
- Release on :2017-04-15
- Release on :2017-04-15
First: AV Jack is a standard definition jack, also named RCA Jack, now most of device has AV Jack.
What’s the meaning of AV/RCA
We mentioned the in the above section, AV is intertwined initials of Animation Video , this is commonly nomenclature, but our foreigner friends calls it’s RCA Jack. Most of device has AV Jack, it’s commonly used by people.
Next:How to distinguish model PAT-330 and model PAT-220
is AV Jack
First: AV Jack is a standard definition jack, also named RCA Jack, now most of device has AV Jack.
We mentioned the in the above section, AV is intertwined initials of Animation Video , this is commonly nomenclature, but our foreigner friends calls it’s RCA Jack. Most of device has AV Jack, it’s commonly used by people.
Next:How to distinguish model PAT-330 and model PAT-220
- Release on :2017-04-12
System: PAL / NTSC
Frequency Band: 5.8GHz
IR Remote Control: 38KHz
Transmission Distance: ≤300 Meter
Watch your favourite movie in your bedroom, cheer for your favourite football team in the garden or play your kids videos in their room while you’re having dinner with your friends downstairs.
Why be limited to one room when you can have the freedom to enjoy anywhere you like? The Wireless HDMI Sender connects your AV devices and lets you control them from a different room. The signal quality stays optimal, even through a wall or floor.So, if you don't want to run ugly cables across your floor, or can't run them through your walls, wireless can be great. Long distance 300 Meters HDMI wirelesstransmission distance( line of sight); 5.8GHz frequency band transmit HDMI audio video signal with stable picture and sound; IR Remote support you control the program and volume at TV end, even if the DVD Player and TV was set in different rooms; wireless av sender also support one transmitter and many receivers, such as you have one set DVD player place at living rooms and may TV was placed at different rooms(eg. Living room/bad room/kitchen room), you are no need to move DVD player also enjoy wonderful video, just connect the receiver with TV, everything was done.
The transmission distance is line of sight, if between the transmitter and receivers exist walls, then the transmission distance would be down to 10 meters; with the time development, resolution up to 4K or higher, but for wireless av sender(also known as video sender, wireless av transceiver, or wireless video extender), it still stop at Max 1080P, most of wireless av sender only 480P as stand definition, the unit price of 1080P wireless av sender is very expensive, only a little user would pay for it.
Wireless AV Sender is a good idea for solve the problems of fix cables, it’s still have larger space on technology and cost, producer should come out new idea for resolution and make the video transmission more stable. finally, the unit price also very important.Previous:IR Extender Wire or Wireless
Next:The Difference between PAT-550 and PAT-580
- Release on :2017-04-08
Transmitter and receiver as below, but no one can distinguish it’s belongs to transmitter or receiver.
But if you already get the product, you can check behind of both transmitter and receiver has serial number, the first three is model No. Like 330 or 220. So you can recognize this unit belongs to which model.
We need pay more attention about wireless product before make order, and double check with seller, or you will loss one way freight at least.
Next:If I need wireless av transmitter receiver for different floor?
Some of clients would take wireless av transmitter and receiver for connect with their TV Box and CCTV Camera to TV and monitor, but the house holder would not let them run cables in the house, so which brand wireless av sender(what is it) would be better for then?The first model PAT-360:
- Release on :2017-03-25
This model has 350 meters transmission range at line of sight, but after passed one floor, then the transmission distance is 15 meters. But this model do not support IR remote control, so normally we would suggest CCTV Camera(RCA jack, not HDMI jack) user choose this model, it’s just for receiving videos, not need to change program.The second model PAT-260:
This model is RCA/AV jack, not HDMI jack, it has the same transmission range and penetrate ability with PAT-360 av transmitter. This mode support 38khz frequency band, suitable for connect with TV, one transmitter and many receivers are support. Most of TV user would like to choose this model.
The last model PAT-266:
This model is RCA/AV jack, not HDMI jack, it has the same transmission range and penetrate ability with PAT-260 av transmitter. But this model support both 38/56khz frequency band, the transmitter parts support one group av in and one group av out, this model more suitable for the clients need to use TV Box and DVD player, that will be much easily for change the signal source; besides, this model support 56khz frequency band for ir remote, most of home appliance adopt 38khz frequency, if you change the ir frequency into 56khz, that could avoid ir interference.
Above three models suitable for used at different floors, but there still has limited since wireless signal always been reduce by concrete wall, so those three models also would be better for used for penetrate 1 floor.Previous:How to distinguish model PAT-330 and model PAT-220
Next:Digital Audio Video Signal Transmitter Receiver PAT-550
- Release on :2017-03-23
1. PAT-550 av transmitter is RCA Jack input and output, it’s for typical RCA/AV interface TV and TV box with RCA/AV connection; but PAT-580 HDMI av sender/extender support newest and popular connection HDMI input/output, this interface mach with new TV and TV box, besides, PAT-580 HDMI support 2.0, it perfect combine with all kinds of HDMI.
2. The transmitter of PAT-550 support one group av signal input and the receiver support one group av output, one transmitter and one receiver can be used with one set-top box and two sets TV, but it should be though a convert to split one group av signal into two group. PAT-580 has a small difference with PAT-550, the transmitter of PAT-580 has two HDMI interface, one if HDMI input, another is HDMI output, the interface HDMI input is for connect with TV Box or DVD, another one HDMI output is for connect with mainly TV directly, and receiver end has one group HDMI interface, it’s for connect with second TV, then you will find one sets PAT-580 support connect with one set set-top box and two sets TV.
3. Wireless av transmitter and receiver PAT-550 is typical model in 2009, the output resolution only 640*480P, it’s called stand definition. PAT-580 is developed at the end of 2016, the resolution is 720*576P, it’s not full HD or 1080p resolution, please noted.
Some of clients think if the resolution is 1080P would be perfect, but all of us know that: 1080P wireless av extender cost very expensive. So take it easy, PAKITE R&D is trying to develop a new model for HD clients.
Next:Why my a/v transmitter receiver can not work well ?
- Release on :2017-03-16
PAT-550 support transmit analog and digital signal, so you are no need to worried about the input signal is digital signal or analog signal.
PAT-550 is developed and produce by PAKITE, all products was test at least three times before shipment.
PAT-550 wireless transmission range is 300 meters at line of sight, 25 meters after passed one wall.
PAT-550 transmitter support one group av signal in and one group av signal out, which means one set PAT-550 support connected with one set DVD and two set TV.
PAT-550 support one transmitter and many receivers, the receivers is no upper limited.
PAT-550 transmit audio video signal between transmitter and receiver, so it’s will not influence your other wireless device.
PAT-550 support IR remote control, then you can control your TV program at any room has receivers.
If you have any other questions, please info us at our office website: pakite.net
Next:Technology of PAT-580 HDMI Transmitter Receiver
- Release on :2017-03-03
5. Plug and Play, no need to install any software, support Set-top box, HD DVD Player or other signal source.
6. Support audio 1.0Vp-p, video 1.0Vp-p, makes you enjoy a nice video and real audio.
7. Support 433MHz Superheterodyne IR Remote control, you can change channels at receiver end.
8. Elegant design with high light black.
9. Adopt low consumption and low noise.
Multi-room project for family:
Most of family has TV in living room and bedroom, at least two sets. Two sets TV could get signal form one set Set-top box at the same times, both TV could get the HD video signal. This HDMI product is compatible with 43 "TV.
Next:Smart TV to TV Wireless Transmitter Installation
- Release on :2017-02-24
Like smart av sender support two group av input and 38/56KHz frequency band IR Remote control. But we have to make sure transmitter and receiver should be in the same channels, or it will be can’t work.
Transmitter and Receiver should be keep on same channel(RCA or HDMI).
a. 433MHz Wireless access C1-C8 should be same, normal control at receiver will be ok.
c. Since smart tv to tv sender support two group av input, so transmitter signal input is AV1, then receiver signal output should be AV1.
d. Keep transmitter and receiver was in the same channels, like transmitter was 01 channels, then receiver should be 01 channels. If for other Dial switch also should be same.
e. Keep both transmitter and receiver was in the same channels, then you can adjust the above function at receiver ends.
Wireless TV sender is a wireless bridge between satellite receiver and television, so we need keep all bridge in the same ‘altitude’ for make sure signal can passed to another side.
Next:New Opportunity on PAT-580 Video Transmitter
- Release on :2017-02-18
If the av sender can not work as normal, we should contact with seller ask for solution nor return the goods and complain the quality is not good, that’s make both seller and buyer fells unhappy. PAKITE would like to eliminate your negative emotion and come out solution for you.
Here we talked about the RCA and HDMI av sender transmit audio but no video or transmit video but no audio. If you meet that questions.
First: please double check all cable connection is correct, if your av sender is connect with signal or monitor by RCA Cable, then you have to plug the red yellow white cable with corresponding color jack. please noted: red , blue, green is not RCA Jack, it’s different signal source.
Second: please double check both transmitter and receiver cable connection is no loosen, if still not work, you can try to change another av cable.
Third: this condition is rare, but still exist. Some of satellite receiver has HDMI Jack and RCA/ S-video Jack, so user will connect one set tv with satellite receiver by HDMI Jack, at same times connect transmitter with satellite receiver, which means the satellite receiver has two group av output, but some of satellite receiver do not support two group av signal out put at the same times, that will lead to another tv at receiver end no audio or video signal, even if make the receiver can not work. If you meet the third situation, you just need one transmitter with two receiver, it will be workable.
Any other questions about wireless av sender, welcome leave message with us.
Next:Compare Wireless TV Sender Model PAT-220 and PAT-330
- Release on :2017-02-13
Look at the transmitter, there is two HDMI interface, one HDMI input and another HDMI output. HDMI input is for connect with signal source, like DVD/TV Cable Box/NVR, the HDMI output is for connect with TV directly, which means one sets PAT-580 could connect two set TV. About the receiver, there is only one HDMI output interface connect with TV, it keeps thelong distance transmission function, so you can place the PAT-580 at different rooms.
Welcome to send inquiry about wireless video transmitter, if you have any questionsor requirements, welcome to let us know.
Next:Does PAKITE HDMI av sender support HDMI 2.0 edition?
- Release on :2017-02-06
Next:Redefine HDMI TV Sender
- Release on :2017-01-20
Every clients wanna get one set full HD resolution tv sender, but 98% of then stop since the high cost. And it's transmission range is very short. Now, PAKITE PAT-580 redefine 300 meter HDMI wireless tv sender, with a new design of blue light and long distance transmission range.
It’s a type of wireless tv sender with HDMI jack. It’s 5.8ghz frequency band, 5.8g has 8 channels for avoid interference, example 5645/ 5905/ 5925/ 5945/ 5725/ 5745/ 5765/ 5805. 300 meters transmission range at line of sight, that’s keep the universal SD av sender transmission distance, as for Full HD 1080P HDMI tv sender is hard to make it come true. Besides, it support one transmitter and many receivers, ( For example, three televisions sharing one cable box wirelessly just need one transmitter and two receivers; Transmitter connect cable box by HDMI cable, one television connect cable box, the other two receivers connect another two televisions separately ), it’s real time transmission, no need to connect with wifi and upload the video.
Next:DVD to TV HDMI A/V Transmitter Installation
- Release on :2017-01-07
Next:How to Change Wired Projectors to Wireless
- Release on :2016-12-14
It's full name is High Definition Multimedia Interface. HDMI Jack is a type of media jack for Audio and Video. It’s suitable for video transmission of digital interface, which can transmit audio and video signals at the same time, the maximum data transmission speed is 2.25gb/s.
Wireless av sender:
Now, wireless av transmitter and receiver are widely used at many areas, like education, entertainment, commerce. PAKITE wireless av sender normally used at entertainment for home use, like transmit audio video signal from DVD to TV by wirelessly. Wireless av transmitter and receiver make this complicated settlement become easy to fix it.
You will need one set DVD and one set TV with HDMI Jack, just connect the transmitter with DVD, and put the transmitter above the DVD, second connect receiver with TV, power on, it will be work.
It’s new development by PAKITE, it’s 720*576P resolution HDMI wireless av sender. as for the transmission effect, it completely meet people’s daily life. For more details welcome to send inquiry.
Next:Can I use two sets av sender in my home?
- Release on :2016-12-08
How to Change Wired Projectors to Wireless
A home cinema projector is much like a TV set, except that when you supply it with a video input signal, the image is projected onto a reflective screen rather than displayed it on an LCD panel. Projectors are just as useful for businesses as in the home, especially when making presentations to customers, clients or your staff. As projectors are often ceiling mounted -- or positioned at the back of the room, away from the screen -- converting it to a wireless device using a wireless video transmitter and receiver can save you a lot of wiring difficulties.
l Position the video transmitter next to your video source, such as a Blu-ray player or a cable box(set top box). Note that there is one video transmitter and one video receiver packaged together, which must be correctly positioned.
l Connect an HDMI cable to the video output on your video source.
l Connect the other end of the HDMI cable to the video input on your video transmitter.
l Position the video receiver near to your projector.
l Connect an HDMI cable to the video output port on the video receiver .
l Connect the other end of the HDMI cable to the HDMI input on the projector.
l Connect all devices -- including the video source, projector and the wireless video transmitter and receiver -- to a power outlet and switch them all on.
l Press the "Source" or "Input" button on your projector's remote control and select its HDMI input option. Consult your projector's instruction manual for precise details for selecting the HDMI channel on your make and model.
l Play a video on your video source, such as a PowerPoint presentation on a Blu-ray disc on a Blu-ray player. The video signal is sent wirelessly between the video transmitter and receiver to your projector.
PAKITE launch a HDMI Wireless Audio/Video transmitter and receiver kit with 300 meters transmission range now, fit for TV size under 42 inch, and accept PER-ORDER, if you are interesting, you can contact us to get more details.
Next:Why use Wireless HDMI
- Release on :2016-11-30
Can I use two sets wireless tv sender in my home?
Wireless TV Sender(also known as wireless av sender, Digisender, wireless video sender) is a device that will let you remotely have TV in your bedroom without running a cable, and it's very easy to use and install, but the shortcoming is can not support watch difference channels.
At that time, user come out a solution: I can use two satellite receiver for two sets television, so does the wireless tv sender can support like that? The answer is “ definitely yes.” If any one can do like that, one house need two sets wireless tv sender, I will suggest you use two difference series wireless tv sender.
If such circumstances:
First, as you know, wireless device is easy to get interference from other wireless device, the same theory with wireless tv sender, so we would suggest you place the two set wireless tv sender as far as possible, like one unit place at first floor and second sets place at second floor.
Second, the first av sender at the first floor I will suggest you choose PAT-220/PAT-240, since the short transmission range is hard to transmit to second floor, that will avoid unnecessary interference.
Third, in the second floor I will suggest PAT-536 and PAT-556, Smart series av sender support F1 and F2 access to remote control the satellite receiver. Access F1 is the same with PAT-220/PAT-240, but if you change the access into F2, then the infrared remote control signal would not get interference.
Finally, 2.4GHz frequency is difference frequency band with 5.8GHz, so the frequency band would not get any interference.
That’s a solution for someone need wireless av sender for many sets television for getting difference channels.
Next:How to use PAT-433 Wireless IR Extender?
- Release on :2016-11-23
How to use PAKITE PAT-433 Wireless IR Extender?
First, PAT-433 is a type of wireless IR Extender, it’s used for extension the infrared remote control distance.
PAKITE PAT-433 tv ir sender is 433.92MHz ISM frequency band,support 38KHz IR Remote control, support 200 meter remote control distance at line of sight.
PAKITE PAT-433 including one pcs transmitter and one pcs receiver, as the following picture:
First: for control tv at from another place.
If you would use PAT-433 ir sender to control ( increase or reduce) the Volume of tv, then you need put the receiver at tv end, as the following picture 1, and remote control at transmitter end as the picture 2.
Second: for control Set Top Box/DVD at TV end.
If set top box and TV were placed at different rooms, you would use PAT-433 to control set top box to change program at tv end. Then you need put receiver at set top box end as picture1, and control transmitter at TV end as picture2.
IR Cable : Transmitter connection with TV as picture 3, receiver connect with set top box as picture 4, this is for hidden Receiver at Set Top Box end, if you are no need to hidden Receiver, IR Cable is no need to connect.
It’s a little difficulty to understand? You just need to remember control at transmitter end, then everything will be ok. If still can not understand, welcome leave message with us.
Next:What is HDMI Wireless A/V Sender?
- Release on :2016-11-10
What is HDMI Wireless A/V Sender
What the difference between HDMI and AV Jack?
HDMI(High Definition Multimedia Interface),HDMI is professional digital output/input, that support transmit both audio and video at the same times, the highest transmission speed is 2.25GB/s.
AV jack is for transmit audio video by separate, it’s consist of Red, White, Yellow, cable, the Yellow is for transmit video signal, the Red is for transmit left audio, and White is for transmit right audio.
HDMI AV Sender including which jack?
A HDMI AV Sender(known as HDMI video sender) contains a Transmitter and a Receiver. The transmitter jack including one group HDMI input and one group HDMI output, DC input and IR cable jack. The receiver jack including one group HDMI output, DC input.
How to connect the HDMI AV Sender(Wireless HDMI Transmitter and Receiver)?
First, Let’s connecting the transmitter: Two sets tv only need one sets AV Sender(one transmitter and one receiver), the first step should be connect the Satellite TV receiver with the transmitter by HDMI Input, and connecting the HDMI Output with the nearest tv by HDMI Cable, and connecting the plug.
Second, connecting the receiver with TV, just connect the HDMI Output with the second tv and connecting the power, then it will be work.
Please pay attention:
Put the transmitter near to the Satellite TV receiver, and keeping the transmitting window extrudes out by 1 to 2 cm and vertically aims at the receiving window of the IR signal of the satellite receiver device.
Or, you can hidden the transmitter at any place, just keep the transmitter far away from the satellite receiver, and connecting the IR able with the transmitter.
Why keep the transmitter far away from satellite receiver if connecting the IR cable with transmitter?
That because if the transmitter and the satellite TV receiver getting closely will cause IR conflict. If the IR remote is insensitive, then we will suggest you use the second method—keep the transmitter far away from the satellite receiver.
If any other questions welcome to send message to www.pakite.net
Next:PAKITE HDMI Video Sender - Advantage
- Release on :2016-10-08
What is Wireless HDMI?
Wireless HDMI is a technology for serving wireless high definition video and audio in consumer electronics. This is a relatively new technology as you can tell by the low number of products available at this time. However, Wireless HDMI is the perfect alternative to putting holes in your walls to run HDMI cables through. In fact, you can broadcast in full 1080p using most Wireless HDMI kits likes Pakite HDMI kit seen above are designed to help make installs much easier when you can't stick components in the same room.
Future of Wireless HDMI:
Eventually all devices that accept HDMI cables now will have wireless HDMI technology built in. Currently it's just too expensive to use a feature that may not even be used by consumers. Pakite company new launched a HDMI wireless transmitterkit with favorable prices.
PAKITE Brand HDMI Video Sender not the Full HD resolution, but support the most popular HDMI Jack with 720*576P resolution, that’s for cater to the market demands.
Wireless HDMI transmitters:
Many solutions require both a wireless transmitter and receiver.
A HDMI wireless transmitter is a device that is plugged into the source device, i.e., your computer. The transmitter records the computer screen and sends it to a receiver through some kind of wireless connection.
Pros: It uses its own wireless frequency and therefore often a good and stable streaming quality.
Cons: You need to plug an USB or HDMI stick into your computer. This rules out mobile or tablet use straightaway. And if you don’t have a compatible HDMI port on your computer, you will need an adapter and converter, as is the case with a regular HDMI cable.
Why use wireless HDMI?
Well, who would use wires if you can make it wireless?
Wireless HDMI is necessary when a wired connection would be too clunky or inconvenient. It’s certainly better than having to install cables underneath the floor or in the walls of an office or creating DIY solutions that involve zip ties and duct tape to run the cables along the floor.
Next:How to Transmit Wireless TV?
- Release on :2016-09-30
PAKITE HDMI Video Sender - Advantage
Now, there is some of Full HDMI Wireless av sender( wireless av sender also known as Video Sender, Wireless TV sender, DigiSender ), Full HD Resolution with 10-50 Meter covering range. So what is the advantage of PAKITE HDMI Wireless AV Sender(what is it)?
PAKITE Brand Wireless HDMI Transmitter and Receiver support 480P,576P,720P,1080I,1080P@60Hz resolution input by HDMI Jack, the output resolution is 720*576P.
PAKITE Brand HDMI AV Sender not the Full HD resolution, but support the most popular HDMI Jack with 720*576P resolution, that’s for cater to the market demands.
After review the above parameter, Full HD HDMI AV Sender seems like much better than PAKITE Brand.
PAKITE Brand HDMI av sender support One transmitter and many receiver; But most of Full HD resolution video sender do not support one transmitter and many receiver, only for point to point transmission.
PAKITE Brand HDMI Video Sender support used at different rooms: But most of Full HD resolution video sender only support used at the same room, since the bandwidth the covering range will be very short, like 50 Meter or less.
PAKITE Brand HDMI Wireless AV Sender unit price is much cheaper than Full HDMI resolution, Full HDMI video sender with 200 meter covering range unit price cost around 350-400usd per sets for wholesale, but as for PAKITE Brand AV Senderaround 100usd for wholesale.
Comparing all the fact, 720*576P resolution will be much suitable for family use.
Next:PAKITE Brand HDMI Video Sender - Parameter
- Release on :2016-09-26
PAKITE Brand Wireless HDMI Transmitter and Receiver - feature
What is HDMI wireless av sender (details)? Simply, it is a device to replace the cable for transmit analog or digital signal.
The following is the wireless av sender feature:
They look like wireless routers,thanks to their small size it’s pretty easy to hide them, and their elegance design to adornment the TV bench .
HDMI Wireless AV Sender(wireless HDMI transmitter and receiver) allowing you to transmit audio video wirelessly from HDMI signal source at living room to a television at another room. It's a simple concept and there are some drawbacks, but for many households it's a timely solution to an annoying problem.
HDMI AV Sender make you can enjoy freely wireless HD AV sharing data and Hi-Fi audio and video effect.
Next:Transfer a Wireless TV Signal
- Release on :2016-09-28
PAKITE Brand HDMI Video Sender - Parameter
The basic idea behind the HDMI AV Sender (known as HDMI Video Sender) issimple: make user can enjoy freely wireless HD AV sharing data and Hi-Fi audio and video effect.
Scenarios where these could transmitting signal from a Blu-ray player at one end of a room to other rooms without having to worry about the usual long cable run, or sending a satellite receiver signal from the living room to bedroom without second-room subscription. But at the same times, you can not review different program at different TV ends.
The PAKITE newborn HDMI Wireless AV Sender use 5.8Ghz frequency rather than 2.4Ghz frequency band, that because most of WiFi router is 2.4Ghz frequency band, the HDMI wireless transmitter is 5.8Ghz frequency can effectively avoid interference.
The HDMI Video Sender support 300meter transmission range depends on there not being any walls between the transmitter and receiver, as we know, if there is wall as obstacle will reduce the transmission range, after passed one wall as obstacle, the transmission range will be 10meter.
Next:PAKITE Wireless HDMI AV Sender - Feature
- Release on :2016-09-20
A television signal can be transferred from one TV to another video display, providing that both have video inputs and outputs. A wireless Audio/video transmission system(wireless av sender) can transfer the signal and is available from an electronics store or the TV accessories section of a department store. Audio/video cables found in most households, but which can be acquired from the same stores as the wireless Audio/ Video transmission system, must be used as well.
Place the wireless tv transmitter next to the television(By the way, if your Television has HDMI port, you should use HDMI wireless transmitter). Plug its power cord into an outlet. Insert one end of a video cable into the video output on the back panel of the TV (labeled "Composite" on some sets). Insert the other end of the video cable into the video input on the transmitter. Repeat this procedure with an audio cable, only plugging the red and white plugs at one end into the red and white outputs on the TV and the red and white inputs on the transmitter.
Place the receiver next to a video display on which you want to watch the TV signal being transmitted wirelessly, for example, another TV. Plug the receiver's power cord into an outlet. Insert one end of a video cable into the video input on the back panel of the video display device. Insert the other end of the video cable into the video output on the receiver. Repeat this procedure with an audio cable, only plugging the red and white plugs at one end into the red and white outputs on the receiver and the red and white plugs on the other end into the red and white inputs on the video display device.
Turn on the TV to which the transmitter is connected. Turn on the video display device to which the receiver is connected. Press "Menu" on the remote that controls the video display device.
Navigate through the settings until you come to the "Video input" or similarly named menu. Select this menu. Highlight the video input to which the video cable is connected. Press the "Enter" or "OK" button, depending on the make of the remote. Press "Menu" to exit the settings so that you can watch the TV signal being transferred to the video display device.
Good news: PAKITE wireless hdmi transmitter and receiver with hdmi jack is coming soon, and the hdmi video sender is used for the TV device with hdmi port. Waiting for your inquiry about the hdmi wireless transmitter.
Next:New goods: PAKITE HDMI jack Wireless A/V Sender
- Release on :2016-09-19
300m HDMI Wireless Transmitter and Receiver
PAKITE Brand HDMI Jack wireless av sender(what is it?) will be on sale at Sep, that’s a good news for old clients and end user.
PAKITE wireless HDMI transmitter and receiver is 576p resolution with HDMI Jack, the price will be much lower than Full HD wireless av sender; HDMI Jack wireless av sender support 300 meter transmission range at open space, that meet family needs in common use, if Full HD resolution, the transmission range could not be so long; HDMI Jack wireless av sender support one transmitter and many receiver, most of Full HD wireless av sender do not support, Full HD av sender is point to point transmission, so it doesn’t support one transmitter and many receiver, besides the transmission distance is very short; HDMI wireless transmitter support IR Remote control also.
Compared with SDI RCA/AV and HDMI Jack wireless av sender, new model HDMI keeping all advantage of AV Jack, and the cost would be much cheaper than Full HD AV Sender, that will make PAKITE HDMI Jack wireless av sender open a new market between SDI and HDMI.
Now, we accept booking HDMI AV Sender, welcome to leave message at www.pakite.net
Next:Cable TV Transmitter with HDMI jack
- Release on :2016-09-14
Transmitting a TV signal over a wireless connection requires a wireless tv sender's (known as wireless av sender[what is it?]) transmitter that is connected to a digital video recorder (DVR) or cable box and a wireless av receiver that is connected to a second TV. Once the connections are working properly, any TV in your house can receive the signal—no need for additional cables.
* Insert one end of an RCA audio/video cable into the video-out port on your DVR, cable box or satellite receiver.
* Insert the other end of the RCA audio/video cable into the video-input port of the wireless transmitter. The wireless sender will be sending the TV signal to the receiver connected to the second TV.
* Set the wireless transmitter on a flat surface, such as a TV stand.
* Insert one end of a second RCA audio/video cable into the video-out port of the wireless receiver.
* Plug the other end of the RCA audio/video cable into the video-in port on a second television.
* Set the receiver on a flat surface near the TV.
* Turn on the power to the sender and receiver.
* Test the transmission to the second TV by selecting the input source to see if there is a picture. To change the input source, press the "Input" on the remote control for the TV.
Tips & Warnings
* If your computer has a TV tuner card, you can watch wireless TV on your computer monitor by connecting the receiver unit to it.
* If your second TV does not have an RCA input, you can connect the receiver unit to a VCR or DVD recorder that has a coaxial cable to connect to the TV.
* Connecting the RCA cable incorrectly on the back of the DVR, cable box or satellite receiver will prevent the transmitter from working properly.
Good news: PAKITE hdmi wireless transmitter with hdmi jack is coming soon, and the wireless tv transmitter hdmi is used for the TV device with hdmi port. Waiting for your inquiry about the hdmi wireless transmitter.
Next:HD transmission mode and characteristics in supervision system
- Release on :2016-09-14
HD transmission mode and characteristics in supervision system
With the Networking, high definition, intelligent, integration developing, Supervisory system transmission technology are continues to innovation and upgrading.
As an integral part of the monitoring system, the different transmission modes have different characteristics. Based on the camera's output signal, HD videosurveillance has a variety of transmission mode.
HD Web Camera: that adapt the standard Ethernet transmission, the short distance transmission adapt the unshielded twisted pair, the long distance transmission mainly adapt optical fiber or wirelessly. Optical fiber transmission mainly use Ethernet optical fiber transceiver, Ethernet switch, PON and other equipment. Wireless adoption of 3G, 4G, WiFi and WiMAX .
Network transmission is the mainly transmission mode of high-definition video surveillance since it’s have small transmission bandwidth, low cost, flexible networking features character. But at the same time, but the compressed video quality, latency, the clarity of the movement of the process is not so good as non compressed video. So it not suitable for someone has higher requirements of video quality .
HD-SDI cameras: the HD digital component serial interface (BNC interface ), non compression way. Coaxial cable is used for short distance transmission, long transmission distance through fiber, HD-SDI optical equipment. The HD-SDI transmission method can transmission high quality image, high level safety, no latency, it suitable for applications at high requirements both image quality and safety. Due to HD-SDI video transmission bandwidth is 1.485Gbps, take high bandwidth will add the network cost, at the same time group network also have the limit, only the use of point to point optical fiber transmission.
At present, there has come out a visual lossless coding technology to solve HD-SDI bandwidth problem, which uses an HD-SDI interface , in the transmission of HD video visual lossless coding, that can reduced the bandwidth to 1 / 6 of the original. HD video visual lossless coding can be greatly reduced the cost, single wavelength can support 8 HD-SDI video transmission and networking also support node type transmission.
With the development of technology, combined with the new intelligent analysis technology and cloud storage technology, security will gradually enter the 4K image application. As a high-definition video transmission applications also faced more hardly test, the high-definition network transmission technology requires higher bandwidth , more high chip technology, higher application platform, more demanding work environment, more clear image.
Good news: PAKITE wireless hdmi transmitter and receiver with hdmi jack is coming soon, the hdmi video sender is used for the TV device with hdmi port. Waiting for your inquiry about the wireless hdmi transmitter and receiver.
Next:How to make sure HD transmission effect in supervision system?
- Release on :2016-09-13
How to make sure HD transmission effect in supervision system?
Market has come out many kinds of HD transmission method, the aim istransmit audio video and date to the needed place by different carrier, but in this section stable transmission is the key of video monitoring system.
HD monitor is a unified whole, involving a number of aspects of the monitoring system, including front-end video capture, video transmission in the middle, back-end HD storage, display, analysis, linkage and so on. From the point of view of the transmission link, how to ensure that the information clearly and effectively?
Transmission as an integral part of monitoring system , how to ensure the integrity of video and data signals transmission in the project?
Transmission scheme : the above transmission mode has its own characteristics, and construction project system use at the different environment , so the choice conforms to the transmission mode of the project is very necessary. For example: long transmission distance should be choose optical fiber transmission; in the preliminary planning of transmission should considering the issues of the bandwidth, and the issue of the whole system bandwidth, we must detection and confirmation according to the real condition.
Wire section: that’s the essential factors of the system operation is long-term or short-term, for example: the SDI signal transmission, as a serial digital signal on the transmission rate requirements is very high, coaxial cable will be the best carrier of short distance transmission in this project, but coaxial cable has many kinds specifications , so this is a difficult task for select the wire.
Next:Wireless digital/analog TV sender
- Release on :2016-09-12
Coming Cable TV Transmitter Receiver with HDMI jack
Television never out date even if PC has become common, television is for family entertainment, but normally PC is for personal and work .
Nowadays, PC has become more and more popular and commonly , Cable TV also get influence. but PC would not replace television for ever. Even if most of younger people use iPad watch movie and TV show program, but their also would like place television at living room, it’s family culture, whatever where you are, in China or abroad.
Now, most of family use set top box to get more channels, television have toconnect with set top box by cables, if now you have cable tv transmitter, then you are no need to worries about the complex cable settlement, easy to install and set up, you can place set top box and tv at any place as you want.
Cable TV Transmitter also named wireless audio video transmitter, or tv signal transmitter, it’s not only for transmit television signal, it can transmit all of format signal, both digital and analog signal, for tv, cctv camera, dvd, dvr... All can be workable. Cable TV wireless tv signal Transmitter is including one transmitter and one receiver, transmitter connect with tv box and receiver connect with monitor.
Cable TV Transmitter will update HDMI jack soon, if you are interesting in thishdmi wireless transmitter, welcome leave message at www.pakite.net .
Next:Customers' question about Wireless A/V Transmitters and Receivers
- Release on :2016-09-12
Customers' question about Wireless A/V Transmitters and Receivers
Question: I have cable service in my living room only. The apartment manager won't let me run a cable to my bedroom. Is there a device that will let me remotely have TV in my bedroom without running a cable?
Answer: Yes, there is. It's called a wireless av sender(what is it?). Some people call it wireless tv sender while it used on TV. On a small scale, it works the same way as a TV antenna only instead of a local broadcast station sending a signal out to anyone who has an antenna, the TV in your living room will be the sender of the signal for the receiver in your bedroom to decode.
The way it works is connect the television in your living room to the transmitter, and the TV in the bedroom to the receiver. The signal travels through the open air, and is decoded by the receiver in the bedroom. My advice is to have the transmitter and receiver in as open a space as possible to avoid any interference.
Line of sight is a term used for wireless transmissions. This is where the transmitter and receiver can see each other.
Question: I have four tv in my home, can I use wireless av sender also, the resolution is same, the video will be delay if I use too much receiver?
Answer: Yes, you can use one av transmitter with multi-receiver, the receiver is no upper limit; the resolution would not influence by receiver quality, all receiver could get the same resolution and display at monitor;
The video would not be delay, it’s different with wifi router, if too much device connect with wifi router will reduce the upload rate, but whatever how many pcs receiver you connect with one transmitter, the video would not be delay, it’s vivid transmission.
Next:PAKITE PAT-433 Wireless IR Remote Control Extender
- Release on :2016-09-07
As we know, most of device infrared remote control distance only has 5 meter or less, so PAKITE develop one IR Repeater for help user control at long distance.
PAKITE PAT-433 is Wireless IR Remote Control Extender, like an infrared amplifier. PAT-433 adapt 433.92MHz ISM Frequency Band wireless transmission, extension distance around 200 meter, it support 38KHz frequency band, if you need both 38/56KHz frequency band, you can talk with PKAITE sales and check more details.
IR Repeater is only for extension infrared range, can not transmit audio video. if you need transmit audio video at the same times, you may got the wrong model, if like this condition, you can choose wireless av sender(what is it?), not IR Repeater.
Wireless av sender also has infrared repeater function, but it’s totally different product. Wireless AV Sender mainly is for transmit audio video, it also extend the ir remote control range. But PAT-433 IR Repeater is only for extension infrared signal.
Besides, PAKITE wireless av sender mostly is RCA Jack as connection, but PAKITE PAT-433 IR Repeater is no need to connect with the device, just place the IR Repeater receiver parts above the device and control at the transmitter side, then it will be work. It means wireless av sender is only for RCA Jack device, but IR Repeater can be used with any device with infrared remote control.
PAT-433 is worthwhile to try(how to use?), it’s real wireless connection, whatever you device is, as IR Repeater PAT-433 can extension it’s remote control range.
Next:PAT-556, Send Your TV Signal Wirelessly to Another Room
- Release on :2016-09-03
PAT-556, Send Your TV Signal Wirelessly to Another Room
With wireless being the norm for so many of our electronic devices today, it’s pretty surprising to me that the standard way to connect a cable box to your TV is still with physical cables. And the surprise turns into annoyance when I want to put a TV in a room where I don’t have a cable outlet.
I had this situation when I bought my current house. I wanted to put a TV in my living room but there was no outlet there and neither option for putting one in—running the wires along the ceiling and floorboards inside the house or running them over the roof on the outside—was desirable.
Fortunately, after doing some research, I found the Pakite 8-Channel audio video Wireless TV Sender (contain a Transmitter and a Receiver) System with 2 groups of AV Input (Model PAT-556), which sends the cable signal wirelessly from the cable box in my bedroom to my living room TV.
The value of the second input is that you can use these same devices totransmit signals wirelessly from other types of audio and video equipment as well, e.g. DVD/Blu-ray players, streaming media devices, music systems, gaming consoles, etc. I have my transmitter set up with the cable box as one input and a Roku streaming player as the other. These systems can also be useful even if you have them in the same room as your TV, but connecting devices with a cable isn’t ideal, e.g. if the TV is mounted on the wall.
One of the questions that comes up a lot with these types of systems is how do you control A/V devices from another room (e.g. change the channel on your cable box)? That’s where the IR extender comes in.
The IR extender is a thin cable that plugs into the transmitter and has one or more small blocks on it. You position the block close to and in front of the device’s infrared light (hence “IR”). Then when you point the device’s own remote at the receiver unit, which is connected to the IR extender, you can operate the device just as if you were pointing the remote at it directly.
So all that to say that I’m extremely happy with—the picture and sound quality is excellent, there’s really no way to know if it’s going to work with your own setup until you try it out yourself.
Next:PAKITE PAT Wireless Audio Video Transmitter and Receiver System
- Release on :2016-08-31
PAKITE PAT Wireless Audio Video Transmitter and Receiver System
Imagine having your satellite receiver, DVR, or DVD player in one room, and the ability to watch them in another room without running wires; or even listen to your MP3 collection on a pair of powered speakers in another room? You can do just that with the PAKITE Wireless Audio Video Transmitter and Receiver System. It even allows you to use the remote control from the other room, so you can actually change the channels on your satellite receiver without having to walk to the main TV room.
The PAKITE Wireless Audio Video Transmitter and Receiver System easily installs, requiring no tools or complicated (or expensive) cable installation. By transmitting across the 2.4GHz / 5.8GHz frequency band, it gives you the clearest signal with up to a 150 foot range. Transmitted signals penetrate walls, doors, ceilings and floors without any interference. Multiple transmission channels allow you to select the best signal possible, as well as eliminate interference with other household products that may also use 2.4GHz technology. The PAKITE Wireless Audio Video Transmission System features standard F-connectors and RCA jacks, forconnection to any type of TV. It's like getting a wireless transmission system and a separate RF modulator for the price of one product. Per the manufacturer, the unit only works with its included IR emitter. Want to watch in multiple rooms at once? Add an Extra Receiver, (sold separately), and you'll be able to watch in the kitchen, bedroom, or even in the garage!
Next:Wireless TV Sender Receiver Choosing Guide Review
Digital/Analog wireless TV sender
A wireless tv sender (also known as a audio video transmitter receiver, wireless video sender, wireless AV sender or DigiSender) is a device for transmitting domestic audio and video signals wirelessly from one location to another. It is most commonly used for sending the output of a source device, such as a satellite television decoder, to a television in another part of a property and provides an alternative to cable installations.
A wide range of wireless tv sender technologies exist, including analogue wireless (radio), digital wireless (spread-spectrum, Wi-Fi, ultra-wideband) and digital wired (power-line communication). Other, less common, technologies also exist, such as those that utilise existing Ethernet networks.
A typical wireless tv sender kit containing a transmitter, receiver, magic eye and a remote control to select the input.
Video senders have been a frequent cause of RF interference, particularly with car key fobs
Typical wireless av sender applications include the transmission of television audio and video signals from a lounge to a bedroom or from a CCTV camera to a display, as well as interconnecting appliances with audio, video and IP (Internet Protocol) requirements.
Most wireless tv sender systems will consist of three separate components, a transmitter, a receiver and a remote control relay (also known as a magic eye or IR blaster). The transmitter is responsible for transmitting or broadcasting a connected audio-video device, while the receiver outputs that transmitted audio-video signal to a connected television. The remote control relay permits infrared remote controls to operate the equipment whose output is being transmitted.
Analogue video senders have the advantage of low manufacturing costs as the audio and video signals are simply modulated onto a carrier at 2.4 GHz or 5.8 GHz. They do, however, have the adverse effect of causing reduced bandwidth to local Wi-Fi networks and, in some cases, Wi-Fi networks can cause picture interference on the video sender signal. More information can be found in the article on electromagnetic interference at 2.4 GHz. To avoid this, some video senders now use a spread-spectrum technology and can co-exist with wireless networks and share available bandwidth.
Usually there are four FM transmit channels, A, B, C & D, with stereo audio on 6.0 MHz and 6.5 MHz FM subcarriers added to the composite video baseband. These different channels can often be used to overcome the adverse effects of nearby WiFi networks.
The reverse remote control channel is usually fixed at 433.92 MHz, using whatever modulation is on the 34 kHz to 45 kHz IR remote "carrier".
Analogue wireless tv senders can achieve typical operating distances of up to 60 metres (clear line of sight) with DVD quality (720x576) video resolution and stereo audio.
Digital wireless av senders are quickly becoming the most popular solution and combine the use of a system on chip (used for audio and video encoding/decoding) with a means of transmitting the signal, such as spread-spectrum, Wi-Fi and ultra-wideband.
Good news: PAKITE wireless hdmi transmitter and receiver with hdmi jack is coming soon, and the hdmi video sender is used for the TV device with hdmi port. Waiting for your inquiry about the wireless hdmi transmitter and receiver.
Next:Should I Upgrade My Car Charger?
- Release on :2016-08-30
Should I Upgrade My Car Charger?
The prevalence of smart phones, tablets, GPS units, and other electronic devices in the car—many of them powered via USB—means that having a readily available USB-charging source is a near necessity for many people. If you own a car, it’s worth having a dedicated USB charger that plugs into your car’s 12-volt accessory outlet (aka, the cigarette lighter for older folks).
Even if your car is recent enough to include a USB port for integrating music playback and phone calls with your car stereo, it can still be worth spending money or so for a dedicated charging device in order to get faster charging speeds. That’s because your car’s built-in USB port(s) usually put out only 1 amp of current, which is not enough to charge a tablet or even newer iPhone at full speed. If you’re running an app like Google Maps, using your car’s USB port may not charge your phone any faster than it uses power, so you can end up at your destination with the same battery level as when you got in the car. Even if you were to get full-speed charging from an integrated USB port, most cars have only one such port. It’s worth spending a few bucks to have an always-ready, high-speed charger, especially since it can let you charge two or more devices from a single accessory outlet—your family and friends will appreciate that..
Similarly, if you have a USB charger that you bought a couple years ago, it probably puts out only 1 amp. Upgrading will provide you with faster charge times and the capability to charge tablets and other high-current devices. The same goes if your charger has only a single USB port. We’re living in an multi-device age, so it makes sense to have multiple USB-charging ports.
However, if you just bought a USB charger that provides at least 2 amps from each of its ports, there’s no reason to upgrade. Though you’ll be able to charge your iPad Air slightly faster with our top pick, the difference isn’t big enough to spend more money right now.
Pakite CU53B series dual USB car charger might be a good choice for you, although it is incredibly small, the revolt dual is not so tiny that it’s difficult to remove. It stood up to every device we threw at it, including multiple iPhones, iPads, a OnePlus One, and a Samsung Galaxy S5, charging each at full speed. Compared to the competition, it offers the best balance of power and price, And the price of this dual port charger is so low that there’s no reason to consider a single-port model.
Next:What is the Wireless Bridge between Satellite Receiver and TV?
- Release on :2016-08-27
What is the Wireless Bridge between Satellite Receiver and TV?
Satellite Receiver is very popular at abroad market, totally difference with domestic market. I am not mean satellite receiver is out date, it’s just difference life style.
WiFi router is bridge between network and mobile phone, so the same theory,wireless av sender is bridge between satellite receiver and tv.
Wireless AV Sender(what is it?) is including one pcs av receiver and one pcs av transmitter, we just need to connect transmitter with satellite receiver, pls noticed, satellite receiver must has RCA Jack, if only has HDMI Jack, you have to wait a few days, PAKITE Brand HDMI wireless transmitter will be on sale at August; then we have to connect the Receiver with tv, the same with transmitter, receiver only has RCA jack for input and output.
Besides, you can use many receiver to connect with many sets television. You may ask if I use many receiver, the video will delay as the WiFi router? My answer is no. Whatever how many sets tv you connect with one transmitter, the video would not delay or get influence, it’s just wireless sharing and vivid transmission.
Next:AV Wireless Transmitter with HDMI Jack
- Release on :2016-08-27
Wireless TV Sender Choosing Guide and Review
Wireless TV sender ( known as wireless av sender, Digisender, or video sender ) is an affordable and no-fuss solution to the problem of connecting all the TVs in a home to the household's primary set-top box or DVD player. With a AV sender, there is no need to run cables from room to room. The buyer can now watch clear audio and video reception on any television in the house from the comfort of any room. You should keep in mind that 5.8 GHz AV senders provide less signal interference and better picture quality than 2.4 GHz AV senders.
I bought this wireless tv sender because I couldn't see renting another cable box for my home office. I've ended up using it around the house as well. I hooked it to my DVR and now can watch recorded shows anywhere in the house. I wish I could just buy additional receivers and I would set it up permanently, but the hook up is still extremely easy and the boxes are very light and small. You do have to use the remote that runs whatever its hooked too, so periodically I forget where I've left the remote to the DVR .But it also limited by channel selection when using TV senders. Only one television channel can be viewed and transmitted at a time. Currently, there are no solutions available for this limitation. However, one should consider this to be only a minor limitation that does not detract from the convenience of being able to watch the same TV program on two different TV screens in two different locations in the home.
The picture and sound is surprising good. A small TV is perfect, for my 36 inch TV if you get close you can see the difference, but step a few feet back and it looks just fine. It doesn't like the microwave, lots of popping and crackling. Sometimes it crackles when someone walks directly in front of the receiver. A couple times I've had more troublesome interference, but was corrected by changing to another channel on the transmitter and receiver. (it has 4).
You can find a wide selection of wireless av transmitter and receiver on Pakite, including 2.4GHz and 5.8GHz frequency band, transmission range from 150m to 700m.There is always one is suitable for you!
Next:Wireless TV to TV Sender Buying Guides
- Release on :2016-08-27
300m Wireless A/V Sender with HDMI Jack
Full HD has become more and more popular at market, like HDMI Car Camera, HDMI TV Box, HDMI CCTV Camera, wireless HDMI has become tendency.
Wireless AV Sender(also known as video sender, wireless tv sender, DigiSender and so on, what is it?) has come out many years, but only a little people knows Since most of people are retained their traditional and habitual of connecting tv and tv box. But now, people are very focus on home decoration, so their are trying to fine out all of wireless device just for make the install become more easy and decoration more beautiful.
But actually, 1080P HDMI wireless av sender transmission range is very short, like 20 meter; HDMI transmission is point to point, do not support One transmitter and multi-receiver; 1080p HDMI video sender cost is much expensive than SDwireless video sender.
Now, PAKITE come out a solution is combine SD av sender with HDMI jack for TV and TV Box/cable box/DVD and other HDMI device. So user can use PAKITE brand wireless av sender connect with their HDMI device, although the definition didn’t up to 1080P, but if the signal source is HDMI, then the HDMI video sender out put resolution is close to 720P.
The new model of PAKITE brand av sender resolution is close to 720p; it’s support one transmitter and multi-receiver; it’s support used at different rooms; it combined with SD av sender advantage very well, also can be connect with most of HDMI wireless device. finally, the cost of wireless av sender with HDMI Jack is between Full HD HDMI wireless av sender and SD wireless av sender, it’s a larger market for HDMI user.
Wireless AV Sender with HDMI Jack will be on sale soon, welcome leaving booking message at www.pakite.net .
Next:Question of Digital AV Sender for Satellite Receiver
- Release on :2016-08-27
Question of Digital Wireless AV Sender for Satellite Receiver
Many clients asked: Any difference between series digital wireless av sender? Let’s introduce one by one
PAT-220 av sender is 2.4GHz frequency band; 150 meter transmission range at line of sight; support ir remote control; we suggest PAT-220 av sender used at the same room or next room, after passed one wall transmission rang is 15 meter.
PAT-240 av sender is 2.4GHz frequency band; 250 meter transmission range at line of sight; support ir remote control; we suggest PAT-240 used at the same room or next room, after passed one wall transmission rang is 25 meter.
PAT-260 av sender is 2.4GHz frequency band; 350 meter transmission range at line of sight; support ir remote control; after passed one wall transmission rang is 25 meter; PAT-260 can be used at different floor(from first to second), but after passed one floor, transmission range should be within 10 meter.
PAT-530 av sender is 5.8GHz frequency band; 200 meter transmission range at line of sight; support ir remote control; we suggest PAT-530 used at the same room or next room, after passed one wall transmission rang is 15 meter.
PAT-550 av sender is 5.8GHz frequency band; 300 meter transmission range at line of sight; support ir remote control; we suggest PAT-550 used at the same room or next room, after passed one wall transmission rang is 25 meter.
Please noted: when you are installing the receiver and transmitter, make sure transmitter was place at above satellite receiver and the indicate light was in the line, in this condition, ir cable is no need.
If you need to hiding the transmitter, then ir cable is necessary, just connect the ir cable with transmitter and sticker with satellite receiver, and hiding the transmitter,it will be work.
If you place the transmitter above the satellite receiver, and also use ir cable, that will make the ir remote control insensitive. Any questions about the product you can leave message at www.pakite.net.
Next:Types of AV Senders Wireless
- Release on :2016-08-27
Types of Wireless AV Senders
There are two basic types of AV senders, each transmits in a specific frequency range: 2.4 GHz or 5.8 GHz. The different frequencies are transmitted by radio waves through the use of an antenna attached to the transmitter and receiver. The frequency range determines the overall quality of the transmission signal of the transmitter to the receiver.
2.4GHz Wireless AV Sender:
2.4 GHz AV sender is more popular than 5.8 GHz AV sender. 2.4GHz frequency band has strong penetrate ability and suitable for the environment existing wall, especially for used at different floors. 2.4 GHz AV sender’s television picture may be fuzzy or difficult to view due to frequency interference caused by other devices in the home. Such sources could include baby monitors, WiFi, and anything that operates with a 2.4 GHz frequency.
5.8 GHz Wireless AV Sender:
5.8 GHz AV sender employs a relatively new form of technology that is still evolving. It is more expensive because the signal output and picture are clearer.5.8GHz frequency band has strong anti-interference ability and suitable for open space. With this setup, there is little interference from other radio frequencies as is the case with the 2.4 GHz AV sender. When there is interference such as with 5.8 GHz cordless telephones, the user can change the specific channel within the frequency band to a channel other than the one used by the cordless telephones. Both the transmitter and receiver broadcast frequency channels should be the same. 5.8GHz frequency band suitable for the using environment existing many other wireless device.
In a word, the wireless av sender were divide into two series, 2.4GHz has strong penetration ability, 5.8GHz has strong anti-interference. Choose a suitable av sender to enjoy freely wireless HD AV sharing data and Hi-Fi audio and video effect.
Next:Analog Transmitter and Receiver
- Release on :2016-08-23
Wireless TV to TV Transmitter Buying Guides
In an age of convenience and high-tech home entertainment, many homes now come with more than one television. Today, one finds televisions in kitchens, home offices, bedrooms, and even bathrooms. The main television, usually located in the living room, is where the satellite or cable television box (set top box) is located. In the past, in order to receive cable or satellite television in more than one room, there needed to be a set-top box in each room. This extra installation required cables and wires, and of course the set-top box itself. Having a TV in every room proved to be expensive. Now, with the advent of the TV to TV sender, a television signal can be transmitted from the main television to the other televisions. The Wireless TV sender allows each television to receive the same television transmission wirelesslywithout all the additional expense involved in buying and installing set-top boxes in every room.
This convenience has made the TV to TV sender very popular. In order to make an informed decision when selecting a TV to TV sender, the buyer should know thedifferences between 2.4GHz and 5.8GHz TV to TV senders. It is also important that the the buyer is mindful of some of the TV to TV sender’s limitations. Buyers can find TV to TV senders at local electronics shops, electronics departments in department stores, and online.
How a Wireless TV Sender Works
To make an informed decision when it comes to buying a wireless TV sender, the buyer must first understand how a Wireless TV sender works. A Wireless TV sender is connected to the main television by way of a SCART socket. The SCART socket is the largest socket located on the back of the television.
The wireless TV receiver is plugged into the secondary television by way of its SCART connection. Once connected, the secondary TV is able to receives radio signals transmitted from the TV sender connected to the main television in the other room.
With a Wireless TV sender, the user can view the television signal on two different televisions in two different rooms. The receiver can also send a wireless signal to the TV sender, commanding it to perform specific functions, such as changing the volume. This is only possible through the use of an infrared sensor on the receiver. The remote control for the main television can be used with the receiver from the secondary television. The remote control is pointed at the infrared sensor on the receiver. When the user pushes the volume button, a signal is transmitted from the secondary TV to the TV sender on the main television. It is important to source an additional remote control as this avoids the user having to take the remote control with them when they move to another room to watch television.
Next:5.8GHz Wireless Video Transmitter with IR Remote Control Extender
- Release on :2016-08-23
5.8GHz Wireless Audio Video Sender with IR Remote Control Extender
Model number: PAT-556
·Work with digital TV set top box, send AV signal to any TV in any room.
·Wirelessly transmit AV signal from Cable, Satellite, TV, DVD player, computer…. to any TV.
·Work with camcorder as a wireless surveillance monitoring system.
·IR extender controls source device remotely.
·Local area broadcasting of AV programs from single source to multiple receiving units.
A wireless av sender allows you to transmit audio/video signals of cable, satellite, video camera, DVD player, VCR, projector, or computer, etc. from one room to another wirelessly. Pakite 5.8GHz audio video transmitter not only provides 300 meters wireless transmission (in open space), but what distinguish itself from other similar products is it avoid the interference from crowded 2.4GHz ISM band applications such as Wireless LAN, Bluetooth, Cordless Phone, etc. And the IR Remote Control Extender allows user to change source device's functions from the remote site. It can change the television channels from receiving location without going back and forth. Both primary and secondary TV have to display the same video program. Once the channel on either TV is changed, the other TV channel will be changed accordingly.
The Wireless audio video sender will satisfy the transmission of A/V device . It enables you to easily realize wireless sharing of SD AV data and enjoy untrammeled hi-fi audio and visual effects.
Next:Wireless IR Extender for Satellite Receiver
- Release on :2016-08-17
Wireless IR Extender for Satellite Receiver
Wireless IR Extender also named wireless infrared remote extender or IR Repeater, some one also call it IR Sender, it’s just extend infrared signal, can nottransmit av signal.
Example: PAKITE PAT-433 is Wireless IR Extender with 200 meter extension range at open space. PAKITE PAT-433 is wireless transmission, no need to connect any cable with device.
Pls noticed, PAT-433 also including transmitter and receiver, but connection has a little difference with wireless av sender.
1.Transmitter placed at tv end,
2.Receiver place at above tv box.
1. Receiver indicate light and tv box infrared indicate light was in the line, if this condition no need connect IR cable again.
2. Receiver was hiding in other place, IR cable was connect with Receiver end, and IR Cable has a sticker should be stick at tv box infrared indicate light.
3. If you need connect many device turn on/off at the same times, you need to order many transmitter with one receiver.
PAKITE PAT-433 is totally wireless connection, it no need to connect with device by cable, whatever your device has RCA Jack or HDMI Jack, you can choose PAT-433 to extend the infrared signal.
Next:A/V Sender for Satellite Receiver
- Release on :2016-08-08
Analog Transmitter Receiver
Transmitter and Receiver was divide into two series: Analog Transmitter and receiver and Digital Transmitter and Receiver. The difference is the input source.
What’s the difference between analog signal and digital signal ?
The analog signal is transmitted in analog mode. The signal is amplified and transmitted by the amplifier, and the signal quality is easily affected. It is possible to have the phenomenon of snow point and so on.
Digital signal to digital transmission of audio and video content, the set-top box receives is after the digital signal modulation, demodulation can restore and the studio the same definition picture, if there is a loss of data may lead to mosaic, but there will be no snow.
How to choose the correct transmitter and receiver for my satellite receiver?
If you do not know the signal type of your receiver, then I will suggest you use PAKITE Brand Wireless AV Sender, all of model of their brand support both digital and analog signal transmit, so you are no need to worry about the input source.
Besides, you can connect their transmitter with your cctv camera. As we know, some of brand cctv camera is analog signal and some of them is digital signal. So may be you should purchase av sender according the signal source, may be one for satellite tv, one for digital cctv camera, and another for analog cctv camera. So it will be complex for user. But if you order PAKITE wireless transmitter, you can use it asanalog transmitter receiver, also it can be digital transmitter and receiver if you needed, it will be much simple for user.
Next:AV Signal Transceiver
- Release on :2016-08-04
A/V Sender for Satellite Receiver
Everybody knows Satellite receiver connect with television need one pcs long or short cable, but now if you have wireless tv sender (known as wireless av sender) connected between satellite receiver and tv no need by cables, you would do like that?
Like this, satellite receiver need connect with AV Cable to transmit audio and video signal to tv, normally av cable is very short Signal was transmit to satellite receiver by cables, and satellite receiver have to connect with another cable fortransmit signal to television.
Most housewife enjoy an bring life, the only fun is watching tv show, but most of time they are busy for household. so they have to keeping moving, clearing house and cooking, so they always missing a part of tv show. Do you come out a idea to make deal? How to make sure whatever you move into which room you can enjoy the video of tv show? If many tv has many satellite receiver and tv, and you don’t know how to fix up the complex cables, so you give up?
But if you own the av sender for satellite receiver, then your idea is workable. You can enjoy the tv show at any place as you want, one set tv in living room, one set in bedroom, and one set in chicken room, you can enjoy an then you will not missing an wonderful moment, by use the wireless tv sender. And it’s easy to install, just need one set satellite receiver and may tv as you want, then you need PAKITE Brand AV Sender for Satellite Receiver, one transmitter connect with satellite receiver, receiver connect with tv, how many pcs receiver you need is depend on your television quality, there is no cable between satellite receiver and tv. and it’s vivid transmission, no need to connect with wifi, no need up loading, you will missing any wonderful moment.
Next:Wireless A/V Transmitter and Receiver for CCTV Camera
- Release on :2016-08-03
AV Signal Sender
AV Signal Sender(AV Sender) also named AV Signal Transmitter and Receiver, it’s for convert av signal between signal source device to monitor.
Which device may need av signal Sender? Like signal source need to connect with monitor, then you may need connect one pcs cable from source device to monitor. But if you use av signal sender, then cable between source device to monitor is not necessary.
Example: now, more and more family has over 1 sets television, but set top box or satellite receiver only one set. satellite receiver is very expensive in some country, besides, the each satellite receiver is charge by carrier operator, So some user may ask:“that is possible if I just use one set satellite receiver but I have 2 television?
AV Signal Sender is necessary in this condition, just connect the transmitter with satellite receiver, And the receiver parts of av signal sender connect with tv, once power on, you can enjoy vivid video at monitor end. One more thing need to confirm: pls make sure your satellite receiver has RCA Jack /Scart Jack/S-Video Jack, if your satellite receiver has the above Jack, then you can change the Scart/S-video Jack to RCA Jack by one pcs cheap convert.
But if your satellite receiver only has HDMI Jack, you may need AV Signal Senderwith HDMI Jack, PAKITE is developing this model, will be on sale at August, if you are interesting, you can contact us to get more details.
Next:Wireless Video Monitoring
- Release on :2016-08-03
Wireless video monitoring concept is not wiring (cable) uses radio waves to transmit video, voice and data signals of monitoring and control system. Wireless video monitoring is divided into: analog microwave transmission and digital microwave transmission. In wireless video monitoring system, the camera is the most front end, the most basic, investment the largest number of a product, which is the most key equipment, it is responsible for video surveillance area is converted into electrical signals, then further for transmission, video monitoring system of its quality directly affects the overall application, but also related to the project cost.
1, Low comprehensive cost, more stable performance. Using wireless monitoring can get rid of the shackles of cable, short installation period, easy maintenance, expansion ability, quick cost advantages.
2, Flexible networking, good scalability, plug and play. Managers can quickly will the new wireless monitoring points added to the existing network, no need for the new transport network, increase equipment, easy to realize remote wireless monitoring.
3, Low maintenance cost. Wireless monitoring maintenance by the network provider of maintenance, the front-end equipment is plug and play, maintenance free system.
4, Wireless monitoring system is the combination of monitoring and wireless transmission technology, it can be different locations of the site information real-time transmission to the wireless monitoring center by wireless communication means, and automatically formed video database facilitate retrieval in the future.
5, In the wireless monitoring system, wireless monitoring center in real time by video information point to point, and the video information is continuous and clear. In the wireless monitoring points, usually use the camera to site condition for real-time acquisition, camera through wireless video transmission equipment, and through the radio waves to send data signals to the monitoring center.
- Release on :2016-07-26
2.4G/ 5.8G Indoor Wireless Video System
PAKITE 2.4GHz/ 5.8GHz Indoor Wireless Video Systems(Wireless AV Sender) provide Plug & Play solutions where running cabling is not possible or is too expensive. These 2.4G/ 5.8G Indoor Video Systems are custom made to fit your exact requirements to save you time and money. The wireless video transmitters and receivers are the perfect fit for almost any Indoor wireless video application from 150m to 700m clear-line-of-sight range. These systems are ideal for Digital Set Top Box TV, Satellite receiver, IPTV, DVD, CCTV security, video surveillance and other fixed camera applications with no programming required. Each system is Plug & Play and includes a Wireless Video Transmitter & Receiver, IR extender wire, power supplies , RCA video/audio/power cables for each unit or easy trouble-freeinstallation. Free Life-Time technical support is available with all our products.
With all Indoor Wireless Video Systems clear-line-of-sight is you best option for installations, but with most homes and buildings this can be impossible to achieve. We recommend to try and setup your Indoor Wireless Video Systems to penetrate as few walls as possible. The more walls that the wireless video signal needs to pass through the weaker the signal gets. PAKITE Digital 2.4GHz long range transmitterand receiver work best when using your Indoor Wireless Video Systems in environments that contain several walls between the wireless video transmitter and receiver. Always consult with one of technical support specialist before you purchase these Indoor Wireless Video Systems to discuss the details of your application. In many cases running cabling is your best option when dealing with several walls. The Indoor Wireless Video Systems can use cabling from the transmitter to the camera or input video signal to obtain a location that is more signal friendly. Cabling can also be used from the receiver to the video monitor or DVR for better signal reception. This may be the best option for old buildings where the construction may hinder the video signal of the Indoor Wireless Video Systems.
Next:TV Signal Transmitter and TV Receiver
- Release on :2016-07-23
Story of TV Signal Transmitter and TV Receiver
With the time goes by, wireless is more and more popular at market, wireless router, wireless headset, wireless smart control, now tv can be connected with tv box by wirelessly.
Do you remember the tv receiver like this when you are little child?
Just set one pillar at open space with antenna wire and make sure no obstacle around the pillar, then connect a long cable from the pillar to tv, then tv will get the signal from the pillar to TV.
And now, you will see more tv receiver like this, a small device like pan.
Just put the device outside, and connect a long cable to connect with set top box, and connect the set top box with tv, then tv will get the signal. It’s much easy to install, but it’s still need a cable from set top box to tv, besides, one set tv receiver only connect with one set tv. But now, so many family has two or more tv, then we need connect more cable and need more set top box?
No need, just need purchase one set PAT series TV signal Transmitter (known as wireless av sender(what is it?), or wireless tv sender) is ok, no need the complex cable between tv and set top box, besides, even if you has two or more tv, also you just need one set top box.
Purchase wireless av sender, it contains an av transmitter and receiver. Transmitter connect with set top box, and receiver connect with tv, once power on, it will be work, if you have more than one set tv, then you may need many pcs receivers, receiver qty is depend on your tv qty, the receiver is no upper limit, but the user should keep all receivers within the transmission range. Besides what ever how many pcs receivers you connect with one transmitter, the resolution would not get influence.
Pakite brand TV signal transmitter support both Digital and Analog signal, so no worries about the input signal source, but the connect jack between transmitter and set top box only has RCA jack, or if tv or set top box had S-video or Scart jack, then you need to use a converter to connect the transmitter and receiver with your tv and tv box, but HDMI Jack is not support, pls notice.
Next:Video conference will be the tendency
- Release on :2016-07-19
Wireless PAT-380 A/V Sender for CCTV Camera
Nowadays, camera has become more and more popular for security, at the same times, more and more cable was around the house, How to fix it? Some of people may be use IP Camera, some may use wireless transmitter/receiver.
IP Camera may easy to use and connect, just connect the camera with network then the user can watch the camera video at mobile phone or PC end by APP. Some area may be only 2G for mobile phone and PC is very rare, if in this condition both camera and monitor need to connect with network is not available, then their have to use cctv camera.
But each cctv camera has one cable at least and has to connect with monitor, so it may be a little difficulty to passed the wall or floor, so that’s why some of clients need wireless av transmitter and receiver. PAKITE Wireless av sender PAT-380 is designed for cctv camera.
PAT-380 av sender is 2.4ghz frequency band, support 700 meter transmission range, but PAT-380 has two antenna box, as you know antenna box transmission is by point to point, so user have to make sure two of antenna box is face to face, so it can transmit audio video successful. The antenna box of PAT-380 av sender is waterproof, so it can be install at outside.
And now we are design another cctv camera wireless transmitter and receiver, new one with small size and also waterproof, if you are interesting, welcome tocontact with PAKITE.
Next:Wireless AV Transmission Systems
- Release on :2016-07-19
WIRELESS AV TRANSMISSION SYSTEMS
Video production requires more than just a cameraman. It encompasses producers, directors, and a technical crew – all of whom need access to the footage being shot – and the faster, the better. In the past, a team of people required to get the right shot had to be hooked up to monitors that were hooked up to the cameras via long cords and cables, which littered the floor of the set, causing potential tripping hazards to everyone present. But thanks to a few advances in modern technology, the production team can now view footage instantly at remote stations via wireless transmission systems.
These wireless av transmission systems can be attached to a camera and can transmit whatever is being filmed to a receiver, which can in turn be connected to monitors so that a variety of people can watch the footage as it is being shot and provide critical feedback to the cameramen. It can also be an excellent directing tool, allowing the director to view the footage and direct the actors and technicians. It’s an invaluable tool when it comes to getting the exact shot you want while using a wide range of cameras, and being able to recognize immediately when you’ve gotten that shot.
Some may be wary of using wireless av transmission systems because of the concerns with wireless frequency allocations in use within a given physical region – there can be circumstances of existing signals in play that cannot be controlled and may interfere with a new signal being added. Wireless technology rid the production world of cumbersome cables, and transmitters have now been designed to be lightweight – adding a minimal burden to the cameraman shouldering the camera. Matching receiver modules can have a range starting at about 100 feet to much further, depending on the choice of the wireless system itself. Most producers and directors operate within 100-250 feet from the action of the camera person in order to be able to give and get directions to the production crew.
Wireless AV transmission systems can be expensive, depending on the needed range, signal quality and license issues. To some, these systems may be considered a luxury. Basic systems will typically run anywhere from three to six to twelve thousand dollars or more in price. Depending on your budget and how important and efficient the instant feedback is to your particular production, it is often worth the money. Cutting the inconvenience of having a multitude of wires and cables on set, increasing the safety factor and speeding up the process of the shooting schedule when using wireless video transmission system can greatly help streamline your production.
Next:Four Questions to Ask about Wireless A/V Transmitter and Receiver
- Release on :2016-07-19
Video conference will be the tendency
Video conference system is a new method of communication, Immersive visualization of the long range communication mode changed and replaced the traditional business model like phone call, email, and business trip.
Through vivid video and audio bring staff get into the real conference mode. That make the "face to face" communication infinitize whatever where you are, thus saving time, reduce the resources and travel cost, improve efficiency and ameliorate operation mode, not only provide the initiative in the rapidly changing competitive environment for help leadership make quick decision, also reduce the business trip to reduce vehicle exhaust emissions from the source, to create an "green office" environment.
More and more enterprise was accept video conference since it show us a Green office mode. And they are started adapting the video conference to enable remote communication and collaboration achieve.
Video communication system for the company enable cross regional and sectoral communication to achieve for internal meetings.
No matter where is your employees, their can join meetings with timely and regularly for held sales report, guide the project smoothly, R & D department can participate in product development, grasp the project progress; and attend the summary of leadership. As the communication technology, video communication can effectively reduce the business travel, saving time and reduce the costs.
With more and more innovation come out, enterprises have begun to use video communication system to help their staff learning more technology. Engineers involved in the technical and product training through the video conference , acknowledge and learn the most cutting-edge technology and product information. Video conference enable the staff make immediate communication and response in the course , renewal of curriculum, the management of training program more difficult to estimate the benefits. Video communication technology can make the company reduce costs.
Video conference can improve the staff's working more efficiency and competitiveness , so that the real energy-saving emission reduction.
Next:Intelligent Multimedia Conference Rooms System
- Release on :2016-07-18
What is wireless A/V transmitter/ receiver?
A wireless av transmitter/ receiver, consists of a transmitter with one or more receivers. It can transmit the color images and sound signal of digital TV set-top boxes, DVD, VCD,satellite receivers, computers and cameras equipment throughwireless to any TV or computer screen. Signal in the open distance can send up to 100 meters, clear usually cut off a wall can reach 30 ~ 50 meters, completely cover any corner in the home, using 433 MHZ wireless technology, infrared remote controlsignal accurately back to audio equipment.
What is the distinguishing feature of wireless AV transmitter?
* Transmit DVD, VCD, set-top boxes, satellite TV and computer video signals to multiple TVs
* Use 2.4 GHz ISM frequency band
* Four groups of transmission channel used for selection
* 2.4 G built-in antenna, small size
* 433 MHZ infrared wireless remote control back
* External surveillance cameras
* Compatible with NTSC/PAL TV system
* Nowiring, small size, does not occupy a space, your household is decorated completely unaffected;
* Safe,reliable, low power consumption:
* Easy to use: just like using ordinary TV;
*Low prices, bargain: don't increase the cost of equipment, does not need to pay more rent on a monthly ratings cost;
The product can give the existing electrical appliances in the convenience of use bring a qualitative leap, there is no regret from study and sitting room not convenient wiring and isolated from each other's. This product can make free interconnection between many appliances, such as: digital TV set-top box, a converter VCD/DVD player, TV, satellite receiver, LCD TV, plasma TV, video tape recorder, disk recorders, projectors, computer monitors, etc., realize the wireless interactive transmission of video stream.
* There is more than two television digital TV set-top box users families;
* Want to watch a DVD in the room other than the living room, but don't want to move DVD;
* Need to use television monitoring young children / elderly / patient family activities (extra wireless camera);
*Multi-TV set-top box digital signal common spaces, such as restaurants,supermarkets, beauty salon, restaurants, clubs and so on.
Next:Which AV Sender is right for you?
- Release on :2016-07-15
Intelligent Multimedia Conference Rooms System
With the continuous development of information technology and the ever-changing multimedia technology, allow us to build an integrated wireless audio and video system(A wireless av sender to be an audio/video signals sharing transmission device by wireless transmit of Smart Multimedia Conference Rooms System), multimedia conference function room needs to become a reality. In considering the traditional meeting requirements, but also with elegant style and beautiful sound, clear image presentation, convenient control, highly centralized management features.
Multimedia conference room system consists of usual/large-screen display, multimedia audio and video sources, audio, central switching and integrated control of several major components. Select the large screen projection DVD and computer and multimedia physical showcase of VGA, video signal is amplified to restore the image, through sound amplification system restore audio. In order to make more efficient and real-time control, equipped with an integrated central control device to the control room for all audio-visual equipment, signal switching, lighting, lift the screen, volume control and other functions, greatly improved the work efficiency and simplify complex operations, can be used for all people and without the need for specialized knowledge.
Digital video technology has gradually matured, and quickly change our lives, with the development of broadband Internet technology, digital video technology has been integrated into the video conference, the distal end of the medical, the distal end of education, remote monitoring, streaming media technology, and other aspect, and service in all walks of life, so for now, the digital video technology is undoubtedly a new economic growth point.
II. The User Needs
The entire system to finish teaching task of high efficiency, combining with each system , give full play to the function of each system, complete intelligent video conferencing.
(A) Multimedia display system
Multimedia display system consists of high-brightness, high-resolution LCD projector and electric screen makeup; complete graphic information on a variety of large-screen display.
(B)A / V system:
A / V system consists of a computer, DVD, VCR (video cassette recorder), physical booth, the remote video conferencing systems, amplifiers, speakers, digital video recorders and other A / V equipment;
To complete a variety of graphic information (including the use of a variety of software, DVD / CD discs, video tapes, all kinds of objects, sound) playback functions; to achieve multi-function hall live sound, broadcast, with large-screen projection systems, It provides excellent audio and visual effects. And by DVR, the entire process can be recorded in the hard disk recorder, to facilitate future inquiries retrospectives.
(C) Meeting room environmental systems:
Conference room environment system consists of lighting the room (including incandescent, fluorescent), curtains and other equipment constituted; complete change of the whole room environment, the atmosphere, in order to automatically adapt to current needs; for example, when you play a DVD, the lights will automatically dim, curtain off automatically.
(D) Intelligent multimedia central control system:
Currently the highest grade, the most mature technology, the most complete, most widely used central control system, which is currently the most advanced central control system equipment. To achieve a variety of multi-functional conference hall centralized control of electronic devices.:
*Requiring a simple, user-friendly, intelligent;
*High reliability requirements of the entire system;
*To achieve a high degree of automation, intelligent control, minimizing operational complexity of the operator, to achieve "a key place" type of control;
*As much as possible reflect the best features of various devices, so that all equipment in the best condition, maximize the effectiveness of the device;
*You can control the projector on / off, input switching, and other functions, and the ability to control the electric pylons, screen, achieve rise, stop, drop and other functions;
*You can control the DVD, VCR to play, stop, pause and other functions;
*You can control the document camera zoom in, zoom and other functions;
*Can control the volume, the size of the sound volume adjustment function;
*It enables audio and video signals, VGA signals automatic switching control function;
*You can control room lights and curtains, automatically adapt to current needs;
Next:Intelligent infrared remote control worth to buy or not?
- Release on :2016-07-14
Intelligent infrared remote control worth to buy or not?
The emergence of a smart product redefines the remote controller. Simply , it given remote magic. Intelligent universal infrared controller, it will not change your habits, but let your life become orderly, more intelligent. And compared with a ordinary remote control, omnipotence IR Remote controller support mobile terminal app operation, does not need any "learning" and "pairing" steps, you only need to download the corresponding brand, model of infrared code, you can realize the intelligent management.
A 'wireless IR extender' can transmit long range infrared signal
Intelligent remote control can responsible for the all of home appliance, in order to make your life more orderly, more convenient. But all of intelligent hardware should be the same brand, such as lighting, switches, sockets can remote control is realized through the mobile phone app. You can enjoy air conditioning cleaning comfortable When you coming back home in the summer .
Young friends with strong ability to accept new product , universal infrared remote control device of humanized design, not only to save the resources of life, mother no longer have to worry about remote control was lose by baby. Mam can control all of the intelligent electrical apparatus by mobile phone , practicability is more important than everything.
It’s easy to install a network environment for this smart hardware, make sure the electric support infrared remote control, connect to the network and find the universal remote control, mobile app binding appliance brand can get started operation. The initial operation is not a difficult task.
Next:Smart Home Appliance
- Release on :2016-07-13
Which AV Sender is right for you?
With the time goes by, more and more av sender brands appear in the market, how can I distinguish which model is fight for me?(more choosing guide)
First, you will need to make is whether you want a Standard Definition(SD) or High Definition (HD) AV Sender. This choice may already be made for you based on the equipment you have. Take example by PAKITE Brand, most of wireless av sender belongs to PAKITE is Standard Definition with AV Jack, as if your device only HDMI jack, then PAKITE Brand SD wireless av sender is not workable. As I know PAKITE launched a hdmi wireless transmitter and will be on sale at next month.
Second, you have to make sure the transmission range, if you will use STB and Monitor at different floor, then I will suggest you choose the av sender with long transmission range like PAT-260 av sender and PAT-266 av sender, if you will use in the same floor but existing many walls between STB(set-top box) and Monitor, then you have to pay attention 150 meter transmission range sender support passed one wall, and 250meter transmission range sender support passed two wall, may be better penetration ability, it’s up to using environment.
Third, you have to make sure the using environment, if you will use the wireless av sender with other wireless device within one house, I will suggest you choose5.8GHz frequency band senders, 5.8GHz frequency band can avoid interference effectively, it’s because most of wireless device is 2.4GHz, so 5.8GHz frequency band would not getting influence by 2.4GHz. If you will use wireless av sender at different floor, then you have to use 2.4ghz frequency band, in this situation, you can switch channels to change the frequency into a little difference with other device to avoid interference .
If you don't know whether you have standard-definition or high-definition equipment then simply look at the back of your equipment and determine what type of output connections are available.
Next:PAKITE Dual USB Car Charger
- Release on :2016-07-13
PAKITE Dual USB Car Charger
Pakite CU53 series as “The Dual USB Car charger” compact design, fine workmanship, feeling comfortable. Double USB interface, short circuit protection design, in line with international safety standards. Tiny in size yet powerful enough to handle any USB charging task, the Pakite Dual USB Car Charger is a must-have for any multi tasking traveler. It packs two powerful USB ports into a miniature, space-saving case that plugs unobtrusively into your vehicle's cigarette lighter outlet. With up to 2.3Amps of charging capability, this charger is powerful enough to take on iPad and other tablet PCs, e-readers, multi-function smart-phones and thousands of other portable electronic devices.
The Dual USB Car Charger can charge two devices at once, dynamically delivering the perfect power to each device via Smart Charge Technology. When two devices are connected, the USB Car Charger automatically charges each gadget at its fastest rate according to its needs. When the device requiring less power has been fully charged, the remaining power (up to the full 2.3Amp capacity) is redirected to the higher-usage device to charge it as quickly as possible. Optimized smart charging with no guesswork required... no that’s intelligence. Your perfect companion for long trips.
Next:PAKITE Wireless IR Extender PAT-433
- Release on :2016-07-12
PAKITE Wireless IR Extender PAT-433
PAKITE PAT-433 Wireless IR Extender(also known as IR Repeater, or IR Sender) consists of a transmitter and a receiver. It adopts a Superheterodyne 433MHz wireless transmission scheme and has the advantages of long transmission range, anti-interference and high sensitivity. This IR Repeater converts the IR signal into an RF signal at 433.92 MHz, for transmission to the receiver unit, up to 200meters away, through walls, doors, ceilings, and floors.
*Use 433MHz ISM frequency band.
*The transmitter and the receiver are used in the same channel in a pair and can be used in the modes of point-to-multipointor multipoint-to-multipoint.
*Wireless transmission =200m.
*Super heterodyne 433MHz Wireless IR Remote Extender is fully compatible with remote control signals of DVD, DVR, CCD camera, IPTV, satellite STB, digital TV STB and other AV devices.
*The Extender is equipped with super strong IR signal transmitting function or used in conjunction with an IR signal extension wire
*Fully hardware-designed. There is no need to install software. Plug and play. Simple and convenient.
*Dimensions: 10cm (L) ×8.5cm (W) ×3.0cm (H)
*433MHz module is FCC CLASSB certificated. Wireless application is safe and reliable
After seeing a lot of poor reviews I was skeptical this would work but decided to give it a shot. To my delight it actually works very well. I have a LCD TV mounted on a wall in the garage with a receiver located across the garage in another corner that drives speakers mounted in the ceiling. I wired the digital audio output over to the receiver to listen to the TV audio through the speakers. It was a pain pointing the remote over my shoulder to change the volume across the room. This extender worked great. Now I can point the remote in the direction of the TV and let the extender transmit the signal across the room and control the receiver. The distance is about 20 ft between the extender transmit and receiver. The distance from the remote control to the extender transmitter is about 10ft. Everything work flawlessly, no delay whatsoever. I'm very happy with this and would recommend it to a friend.
Next:PAKITE Double/Dual USB Car charger Reviews
- Release on :2016-07-12
Smart Home Appliance
Smart home appliance not simply means control the light/ door bell/ home appliances, smart life means the machine is smart enough to get the master idea and hobbies, make the personalized customization, show you a totally different traditional experience.
Smart home appliance still looks like a high level and concept words, it will take a lots of money if we wanna get the real smart , only wealthy house would need it, common people would not and don’t have enough money to make it come true, so we still misunderstanding about the smart life.
Point 1: Smart life is control by Mobile APP?
All of people knows smart home appliance could control by APP, like light, door, window and electrical equipment, seems like smart home appliance equal APP control. Also it brings convenient, but most time we felling it’s make us fell tired since we need so many APP to control different product.
But right now, we make all of product getting connection, so you are no need to worries about the APP problem. When you open the door, the light will automatically light up, air conditioning will adjust the comfortable temperature. The real smart is according your hobbies to customize the life plan for you, no need APP any more, and make you enjoy every moment in your home.
Point 2. Only wealthy house need it?
Most of people think the wealthy house has more space and high cost, so their will need smart control, but for common house, it will be speciosity.
Actually, smart home is a life style, some one may like leather sofa, some one may like cloth sofa, the key point is not how much big of your house, is that the owner requirements about the house. Especially the family has child or old man, mart appliance could solve all of things if you forget turn off the fire, water, close the door, no key to enter your house, smart home appliance become more and more intimate, it’s not only for wealthy house.
Point 3: High cost with low practicability
At first, with the technology improve, the cost was lower than before, and it become more rational and practical, now you just take less than ten thousand yuan you can get the smart appliance, but you may cost tenfold or more to make it come true.
Second, the cost of smart home appliance also related to personal requirements, some one may just need the security or smart lock, some one may need to control all of light at the whole house, family theatre. So the smart home appliance also reduce the cost and make the cost more effective.
Point 4: If loose the mobile phone, it will cause big trouble.
Smart home system can control the appliance working condition, if may mobile phone was loose, then what should I do?
It’s a simple questions, the same theory with online payment, life smart system user will have a personal account and password, once lose the mobile phone, just logo in and revise your password at PC or other device, no need to worry your hose will be under dangerous if you lose your mobile phone. At the same times, security camera video will lock and update into website, only the user can download the video with correct password and it will keep your Privacy stay in safe condition.
Now, Most of supplier develop the new products is according the user demand. therefore, the current smart home appliance really bring us a new experience and life style.
Next:HDMI Wireless Transmission System
- Release on :2016-07-12
PAKITE CU53B Dual USB Car charger Reviews
I'm a tech consultant who is on the road all day. I travel about 35,000 miles a year in my car. I break car chargers left and right. I chose this Dual USB car chargerPAKITE CU53B for the following reasons:
1. The CU53B dual usb car charger is small and compact. The unit doesn't protrude out from the outlet in my car. Most car chargers have that massive end sticking out, like a cancerous growth. This charger is small and sleek.
2. The long standing issue with phone chargers is the connector. The side that physically plugs into the phone, not the side that plugs into the car... at least not for me. Purchasing a USB charger allows me to replace the USB cable after I screw up the "Micro-USB" side of the cable. USB cables are cheap and you can get replacement ones from Amazon for $2-$4 without batting an eye. So, with this charger, when I muck up the phone side of the cable, I can replace the USB cable and keep my charger. Saves plastic, saves the environment. Win=Win
3. There are double charging ports on this usb car charger and it will allow me to charge my iPad and my Samsung Nexus 10 tablet, simultaneously on long trips... or an iPhone and an iPad. Mix and match... think of the possibilities!
4. All devices like to be charged with more power than the minimum amperage requirement. I.E., my Samsung phone asks for a minimum charging amp of 0.5, this car charger has two ports with 2.3A output. This will ensure a fast, strong, complete charge for my phone. Ever noticed that on some chargers your phone takes forever to charge? Yup, this is why. Check the charger for the output Amps and you'll start to see where I'm going with this.
I've had the PAKITE CU53B dual usb car charger for a little while now. It works as expected. Able to charge everything quickly and efficiently. Oddly and thankfully, I haven't broken the USB cable yet. Great charger.
Next:PAKITE Rear View Camera, your best choosing
- Release on :2016-07-11
HDMI Wireless Transmission System
In the current society, People are following and discussing the most popular key words is Wireless and HDMI. And HDMI Wireless Transmission technology has become a tendency of high definition Information release system. In order to match the demand of HD Video transmission technology , developer are keeping to upgrade technology and improve the user experience of video conference.
The reason of HD wireless av sender come out:
Wireless Video Transmission has commonly used in modern enterprise , people are strictly requirements about the layout of video conference meeting room. The connection are full cables between TV, DVD, Projector, Hi-Fi, It’s very complicated, and make the layout not match with the decoration of meeting room, especially the problem how to settle the Hi-Fi at the home theatre?
The Future of HD Wireless AV Sender:
Nowadays, More and more family use HD TV, HD DVD, HD Projector, and video conference also enter HD mode . However, High Definition also lead the development of wireless technology at the present. High Definition come out make the New Digital Jack - HDMI following. HD Wireless Transmission technology solve the complex connection problem of between multimedia home theater. Once got it, Video conference was leave out cables since the HD Wireless Transmission. HD Video Transmission take large wide, due to this character can show us the high quality, high resolution, No compression, No damage video, so many supplier acre coveted. HD Video Conference has a larger and potential demand in the feature.
Simply, HDMI and Wireless will be common in the near feature, whatever whichproduct you are produce: Security product , home appliances, or video conference.
Next:What can PAT-220 AV Wireless Transmitter and Receiver do ?
- Release on :2016-07-09
What function of the PAKITE PAT-220 Wireless Video & Audio Transmitter ?
PAKITE PAT-220 AV Wireless transmitter and receiver is a kind of innovative product, which can realize the audio video signal sharing in different rooms for family entertainment. Our wireless video transmitters and receivers make wireless videoeasy and reliable. Whether it is using highly reliable FM wireless video 2.4 GHz or 5.8 GHz, our wireless audio video receiver transmitter are the perfect solution when it is difficult or impossible to run cables.
* Support 8 groups of channels. You can select these channels to avoid interferencefrom signals of a wireless router. Support one group of AV input signal.
* Long range Wireless Transmission Distance ≤150m in Unobstructed Place or in wide-open area. Wireless transmission distance ≤20m in obstructive place such as living rooms that are walled off by 0-1 wall ( PS: SAME FLOOR ROOMS ONLY). It is usually used in wide-open area, not only used in TV BOX or DVD remote operation, but to control TV BOX or DVD remotely via receiver or CCD/CCTV Camera and any other device with RCA/AV port.
* It can support IR remote control at the receiver end to realize the function of wireless control of devices from another place. Supports video transmission of PAL/NTSC system and stereo audio transmission.
* Use 2.4GHz ISM frequency band, multiple selective channels supported for anti-interference from wireless. The transmitter and the receiver are used in the same channel in a pair and can be used in the modes of point-to-multipoint or multipoint-to-multipoint.
* This unit only has Standard Definition (SD) compatibility, it uses RCA inputs and outputs, does not work with Sky+ HDMI. Support TV size: under 40 inch
* If your family or neighbor were installed 2.4G equipment such as Wireless WIFI or cordless telephone, please choose 5.8G series av sender such as PAT-556.
PAKITE Wireless AV transmitter receiver is well known and professional. An AV wireless transmitter and receiver can easily be used in conjunction with hidden video cameras. Our wireless video surveillance receivers are ideal for receiving video over long distances and save you time and frustration.
Next:How Wireless audio video TV Transmitter Work
- Release on :2016-07-08
PAKITE Car Reversing Camera: Resolve the problem of Parking and Car Reversing
I have to say most of car reversing camera has no innovation in it’s function at recently years, except for using the record video as evidence of accident, the record video is useless for anything else. But some of supplier still keep to improve it, so we can see some of car camera with more function and user experience, like today we introduced PAKITE Brand car rear view camera PAT-860.
This model is the newest of PAKITE Car Camera, except the basic function, the developer added wireless technology into the car camera. Simply, This car rear view camera has two camera, the in front car camera and rear camera, you can switch the camera into in front and rear as you want, so you can enjoy the beautiful scenery even if you had passed away.
Parameter of PAT-860:
LCD: 3.5 inch
Output / input: HD definition/USB2.0
Lens: 140 degree wide angle
In front Camera: 720P (inside of the car)
Rear Camera:480P(outside of the car & waterproof)
Connect Way: Wireless Transmitter
Video Form: AVI
TV Out: NTSC / PAL
Memory card: SD Card (2G-32 G)
Traditional car camera has two camera need to fix cables from back of the car to the driving room. as the following picture the yellow line is for traditional car camera, but this step for PAKTE car reversing camera is no need. The in front car camera installation step is same with other camera: getting the power though the car charge( our stand dual usb car charge). The rear camera connect with the transmitter, and transmitter connect with getting the back up light of the car for getting power. This step for install u can finished by yourself, it’s very easy.
Next:PAKITE PAT-220 AV Sender Reviews
- Release on :2016-07-07
Let’s talk wireless tv sender (known as wireless av sender) connection by picture. And step by step.
How does wireless tv sender work? It's simple really; let's use PAT-220 av sender as an example. The Transmitter connects to your STB by AV cables. Your STB signal is then wirelessly transmitted, through walls and ceilings, to the Receiver.
The Receiver picks up the STB signal sent from the Transmitter and displays it on your TV in another room. you can still use your STB remote to control your STB box using the built-in IR Remote Control.
Just place the av transmitter above the STB, connect transmitter with STB by AV cable in the right way, as the picture show.
Place the receiver besides the tv, and connect the tv by av cable in the right way,as the picture show.
IR Cable Connection:
Connect the IR Cable with Transmitter, and stick the infrared receiving at the infrared of STB receiver, like the following picture.
When you finish the above the step, get the power, you can watch program at different rooms.
But one more thing need to pay attention is: all of receiver were getting the same signal from transmitter, so all of the receiver was display the same program at different monitor.
Next:Five reasons to choose PAKITE
- Release on :2016-07-07
Reviews of Wireless PAT-220 AV Sender
PAKITE PAT-220 av sender set-up was very intuitive and easy. The resolution of the video and Audio is excellent, and the speed is outstanding. The Frequency used by the transmitter and receiver is very strong with good signal strength -- PAT-220wireless av sender can pass signal through walls and between floors, and for considerable distance.
Though I didn't need to change the default frequency (channel), I had great fun switching between them to test the effects on my wireless router. PAT-220 av sender support 8 groups of channels. You can select these channels to avoid interference from signals of a wireless router. The fact that the signal strength at those frequencies was strong enough to wipe-out the signals from my wireless router is amazing.
If you are experiencing interference in the video or audio with PAT-220 av sender regardless of the channel setting, and in the form of pulsing flashes or distortion -- it can be resolved by keeping the receiver and transmitter at least 8 feet away from your wireless router.
I'm really surprised at the low price of PAT-220. The performance is outstanding -- high resolution, fast, and with powerful, clean signal. PAT-220 delivers high value and I am very pleased with this purchase, which has massively exceeded my expectations.
Someone are complained about PAT-220 "built cheap". I have to disagree with these criticisms. Though the product is made from lightweight plastic, the antennae, buttons, and RCA jacks give solid, positive action and sturdy, secure connections. I also found the compact, overall footprint of the endpoint devices of PAT-220 av sender to be very practical / useful. Also, this product includes two sets of AV cables each with terminations for video, left channel sound, and right channel sound, which were convenient to have.
Overall, I have to rate the PAT-220 as having outstanding quality, design, performance, and value.
Next:Coming HDMI Wireless Audio Video Senders
- Release on :2016-07-06
PAKITE is a factory of wireless av sender, AV Senders(what is it?) are an integral part of our product range , we've been producing them for over 7 years now.
Our wireless AV sender range is hand-picked from the wireless av senderindustry has to offer. You can buy inferior, cheap AV senders from eBay, however you won't find units of a better quality with favorable price and service as PAKITE.
We have 17 models of wireless av sender, 2.4ghz frequency band has 11 models and 5.8ghz frequency band has 6 models. 2.4ghz and 5.8ghz is free frequency band for personal use. Now market has so many 2.4ghz frequency band wireless device (cordless telephone, mouse, keyboard, wifi router), signal may interference between those wireless device. So we produce the product with different frequency band for avoid interference.
According the user feedback, their wanna use STB and TV at different floor, so we design wireless av sender model PAT-266 and the PAT-260 and the PAT-360, those mode is for different floor, 350 meter transmission range at open space, even though passed one floor, the picture still stable and clear.
All of good were test at least three times before shipment.
Neutral brand 100sets: 1-2 workdays.
Neutral brand 500sets: 5-7 workdays.
OEM: MOQ:500sets; Deliver date: 20-25 workdays after confirm the samples.
After sale service:
We provide one year warranty o all of end user, even if you buy it from ebay or Amazon, any questions you can feedback to us, our tech team will try to solve for you.
Now, Thousands of clients had choose PAKITE brand av sender, and you?
Next:PAKITE Wireless A/V Transmitter Review
- Release on :2016-07-06
PAKITE Wireless AV Transmitter Review
The Digital Wireless AV Transmitter Kit is a wireless and IR extender solution comprising an audio video receiver and transmitter. Unlike less expensive solutions, the PAKITE product does not require line of site between transmitter and receiver, so will work through walls and between floors. The transmitter has two groups AV inputs, 8 groups of selectable AV channels output and a IR extender, which can be set to 38KHz or 56KHz.
If you’re looking to locate a TV or projector in a place where it would be hard to run cables, or want to connect a TV in another room to you main home theater, the PAKITE Digital Wireless AV Transmitter Kit could be just the best. It just worked flawlessly in all of my tests.
My initial test was from a Blu-ray playing via Power DVD on my laptop, with line of site to the receiver connected to my Kuro plasma display. Everything worked well. Next I moved the laptop and transmitter into and adjoining room and repeated the test. The results were still crystal clear picture and sound. Next was moving the transmitter to the basement where I house all my AV and home automation equipment. Now it’s probably fair to say I probably have more RF interference than most home owners.
For the final test, I moved the receiver to my bedroom and tested from the transmitter in the basement to my 720p plasma. Once again no issues: just crystal clear picture and sound. So PAKITE wireless tv sender digital kit would be your first choice!
Next:Who needs the Wireless TV Transmitter?
- Release on :2016-07-06
AV(audio/diveo) Senders apply a simple, affordable and effective alternative to wired audio/video distribution systems, it’s the only solution where cables can not be run.
A HDMI Wireless AV Sender is a product comprising two main components - a transmitter and a receiver. Working together, these two components wirelessly send Digital and Analog audio/video signals throughout your home. HDMI AV senderare simply to set-up - connect the transmitter component to your tv box (or other A/V source device) then connect the receiver with the tv in the 2nd room. Turn on, then you can watch your favourite programs in the other room.
Not all wireless AV Sender are created equally - there are some difference to keep in mind when making your selection:
Transmission Range: Typically the test range is open space, transmission range between 150-350 meter, but the real transmission range is depending on number of obstacles in the way and what they’re made of. Example our AV SenderPAT-260 (it's SD AV Sender, not HDMI AV Sender) has 350 meter transmission range in ideal conditions without obstacles between transmitter and receiver, if exit obstacles between transmitter and receiver, the shorter range wil be. example passed one wall in the same floor, transmission range is 50meter; if passed one floor, transmission range is 15meter.
Interference: All wireless av transmission product are susceptible to interference, wireless av sender is same. But the difference is the wireless audio video sender are intelligent enough to avoid most interference issues. Example, if you already purchase, you can switch channels to avoid the interference, like 2.414GHz,2.432GHz, 2.450GHz, 2.468GHz......, or if your house already has so many 2.4ghz frequency band wireless product, then 5.8GHz frequency band PAT-550 av sender to avoid interference is the best choice(how to choose?).
The above model is support ir remote control, it’s for convenience of being able to use your remote control from the 2nd or 3nd location.
Pls noticed, all of PAKITE av transmission product is SD(Standard Definition) with RCA Jack, if you are interested in HDMI wireless av sender with HDMI Jack, welcome leave message at www.pakite.net, you can purchase HDMI wireless transmitter after August.
Next:Wireless A/V Transmitter Equipment in Conference Room & Home Theater
- Release on :2016-07-06
Who needs the audio video Wireless TV Transmitter?
The wireless av transmitter mentioned here are for the wireless transmission of video and audio signals from STB/ DVD /IPTV to a TV. There are three main uses for a wireless product:
*If your sources are in a different part of the room than the TV, you can send the signal wirelessly instead of running long cables across the floor (or under the floor, or along the baseboards, etc). This is an especially common problem with projectors.
*If you want to mount your TV on the wall, you need to run power and cables. With wireless, you only need to run power to the TV. The signal from your sources gets sent wirelessly to the small receiver box. In the case of the Pakite wireless tv transmitter, the TV itself can often power this wireless receiver.
*If you want to have your sources and TV in two different rooms. Again, the Pakite wireless tv signal transmitter is a good pick here because it is able to transmit through walls , so you can have a TV in the same room as the sources, and a second TV connected wirelessly to the same sources.
*If you have equipment specifically with HDMI outputs (Blu-ray players, cable boxes, Apple TV and Roku streamers, etc.). This is not for products like Chromecast, or any of the Miracast or WiDi products (which wirelessly stream content from tablets, phones, or laptops). Those are a different category, these are replacements for HDMI cables. HDMI interface devices need a hdmi wireless transmitter to transmit audio and hd video signal.
Keep in mind though, there is a cost to the convenience. Wireless is always going be more temperamental than wired, taking a few moments to sync up (connect) and potentially/occasionally dropping out.Previous:PAKITE Wireless A/V Transmitter Review
Next:High Resolution 1080P Wireless Video Transmitter
- Release on :2016-07-05
High Resolution 1080P Wireless AV Sender
Most of people knows what is wireless av sender, but as the same times, more and more people inquiry about Full HD 1080p Wireless av sender.
PAKITE is factory, over 7 years production experience, but right now, we do not have stock of full hd wireless av sender. Most of clients request :” HDMI has become major market, SD resolution is out date, you should produce wireless HDMI transmitter and receiver, so we can purchase from your company.” Yes, 1080P wireless av sender did exist at market, but if you really familiar with wireless av sender, you should know full hd is no market since the high cost. We can find 1080P product at market, but if you ever get inquiry from seller, you will find MOQ:1000sets at least.
If you have such qty for per month, of course we will produce for you, we have our produce line and R&D team and QC department, everything is ready. if the qty less than 1000sets, factory would not get any profile from it, None of business man will do like this. Unless you pay the factory with a attractive unit price, but at the same times the qty also is needed.
According to preliminary estimates, if real full hd wireless av sender, transmission range 50 meter at open space unit price would not less than EXW 150usd per sets . Including the freight , cost and profit at least 250usd per sets purchase by end user. May I ask any one would buy this device with short transmission range and expensive unit price?
Besides, if your set top box do not provide full hd resolution signal , then you will not get the full hd resolution at monitor; or if monitor resolution is not the real full hd, you can not get full hd resolution, you have to promise all of your device including signal source is full hd, then you can get the full hd screen.
PAKITE will produce one model of wireless HDMI transmitter and receiver with 300m transmission range, if you are interesting, welcome you contact with us by mail: firstname.lastname@example.org, or leave message at Pakite official website: pakite.net, details about the new model will update in the following days, thank for your attention.
Next:How to make 'sharing the same audio & video TV signal in different rooms but just one STB
- Release on :2016-07-05
Wireless A/V Transmitter Equipment in
Conference Room & Home Theater
With the increasing number of technologies and operating platforms at work and home, We solves the complexity of managing this technology with reliable, consistent and scalable systems. Pakite's products audio/video signal distribution, as well as digital technology management. They are implemented worldwide in conference rooms, homes, classrooms, network operation and command centers, hotels, entertainment venues and broadcast facilities, among others.
1, Conference room HD wireless solution:
Modern enterprise conference rooms are equipped with basic hd display device (hd LCD TV or hd projectors, etc.), play equipment is commonly mobility laptop, that at the meeting need to be in the meeting room on a big LCD synchronous display notebook play clearly picture and sound. The beginning of the meeting can use wireless video transmitter to transmit PPT, WORD, high-definition video, large AD synchronization hd audio to the conference room on the large screen LCD TV(PAKITE av sender support TV size under 41 inch) or hd projectors. Generally similar devices cannot transfer full hd video files and promos, susceptible to interference such as mobile phone, and need to drive, it is the best way to modern enterprise conference room layout, avoid the cable layout, full hd signal transmission in the best working distance within 7 to 15 meters, fully meet the general meeting the needs of users.
2, Home theater program:
Many households are equipped with high-end home theater system, through awireless audio video transmitter can make good use of home theater playback equipment, set up a wireless home audio system; Equipment connection order is generally transmitter to broadcast equipment, receiver power amplifier, power amplifier by TV or hd projectors and sound.
Next:How do you connect wireless Audio Video Transmission Kit?
- Release on :2016-07-01
How do you connect wireless AV Transmission Kit?
A wireless AV (audio / video) transmission kit functions in much the same way as a wireless home network, radio frequency waves traveling between the transmitter and a receiver. User just need to Connect the wireless AV transmission kit between a STB and a TV, no need to adjustments wireless signal. All the necessary parts are included in the package, with the exception of AV cables and IR cable.
5.8 GHz wireless AV transmission kit:
- 3 pcs Mini - jack to RCA Jack Cable ;
- 1 pcs IR Cable ;
- 2 pcs 5V/1A Power adapter ;
- 1 pcs User Manual;
Correct connect your wireless audio video transmission kit by the following steps:
1. Place wireless av transmitter with Set-Top Box(STB)/Cable box. Plug one end of the RCA AV cable into the AV output of the STB, Plug the power adapter into a socket for power.
2. Place wireless av receiver with monitor or TV, Plug one end of the RCA AV cable into the AV input of the TV, Plug the power adapter into a socket for power.
3. Place the wireless av receiver next to the TV. Plug one end of the RCA AV cable into the AV input of the TV, Plug the power adapter into a socket for power.
4. Plug RCA plugs on the other end of the av cable into the av outputs on the back of the STB, Plug RCA plugs on the other end of the av cable into the av inputs on the back of the TV.
5. Turn on the TV with the remote. Press Menu. Select "Video input" and select the av input to which the av cable is connected.
It’s complicated by description, but if you would options by yourself or review by video, that will be much simple. You can leave message at www.pakite.net , we will contact with you as soon as possible.
Next:PAT-260 Wireless Strong Penetration A/V Transmitter from PAKITE
- Release on :2016-06-30
PAKITE Wireless Network set-top box sharing Device: Wireless TV Sender
Now everyone watch digital TV programs, but are different from analog era, a set-top box can only match a TV. If you have two TV set at home, then you have to buy two set-top boxes. TV set-top box is not installed will become decoration. If re-install another set-top box, in addition to the purchase cost of set-top box, the set-top box will have to pay a monthly fee. Most family will choose the set-top box installed in the sitting room, so that when we need in the other room to watch digital TV will encounter problems. In fact, we do not usually watch TV in a fixed place, more often, we in the living room during the day and watch the evening want to continue to watch in the bedroom, so if there no set-top boxes in the bedroom, it cannot continue to watch digital TV programs. Not only the digital set-top box will encounter this problem, when using DVD player, satellite TV receiver and other A/V device have the same trouble.
Digital set-top boxes generally divided broadcast, basic, enhanced (IPTVdemand type). Which enhanced STB is powerful, it not only brings us a rich live television programs, also provide vast amounts of TV on demand, video playback. The event, news, review you missed can watch again. However, enhanced set-top box price and the monthly cost is relatively high, with the set-top box on each TV, this is absolutely typical waste of resources.
A set-top box can only to a TV set, thought of lying on the bed to watch TV in the room, but the room do not have the line to connect, set-top boxes can not be detached and moved to the room. Install a set-top box and have to pay rent, but also not commonly used. Pakite wireless sharing set-top boxes Audio Video device will help you! It is named wireless av sender ( It includes an av transmitter and an av receiver ), or wireless tv sender. Implementation can watch digital TV in the room, if you want to change the channel, do not need to be running around, you can change channels in the room directly! The range of available machine: digital set-top boxes, satellite set-top boxes, DVD player, AV audio-visual equipment such as DV machine!
Next:How to make it simple but effective?
- Release on :2016-06-30
How to make it simple but effective?
Now, I will show you how to make Transmit analog audio/video from one tv to another tv by wireless.
First you need on sets Wireless AV Sender(one transmitter and one receiver), if you have two or more tv, then you will need more receiver, it’s depends on your tv qty, one set tv need one pcs receiver.
Second, Analyze your usage environment, if you will use tv in different rooms and different floor, you should choose the transmitter with long transmission range, Example: if you wanna use at different floor, then you have to choose PAT-260, this mode support used at second floor, but you have to pay attention is 1 floor is Max, after penetrate one floor, the transmission range do not over 50 meter.
2.4GHz AV Sender
Built-in worldwide 2.4GHz wireless ISM Band RF module
8 Channels for 2.4GHz frequency channel switching
Transmission distance up to 150meter
NTSC / PAL video format
Support IR Remote Control
Support Analog/Digital Signal Input and Output
Third, after choose the correct models, then you just need connect the AV cable with device, transmitter connect with signal source, receiver connect with monitor. if no signal, Pls make sure av cable matched correct jack, if not will lead to no signal or not video, then you need check the av connection is correct or change another av cable.
Finally, just connect both transmitter and receiver getting the power, and check both power adapter and device's indicator lights on or not.Pls confirm PAKITE power adapter is 5V/1A.
PS: PAT-260 Wireless AV Sender is support IR Remote control, if you can not channels at tv end when the tv and set top box in the different rooms, pls place the transmitter above at the signal source and keep the indicator light of transmitter and the infrared light of signal source in a line, but the transmitter bulge 2 cm.
If any questions about wireless av sender welcome contact with PAKITE, you can leave message at our official website pakite.net, once received your message, our sales will contact with you as soon as possible.
Next:Typical program of wireless meeting rooms
- Release on :2016-06-30
Typical program Wireless Conference room
1. The application of the above audio and video wireless transmission equipment to ensure the stable operation of high-speed backbone network;
. 2 Support various video and audio input source and multiple display output can arbitrarily Switch;
. 3 Wireless transmission without delay, truly plug and play, strong Anti-interference;
. 4 Hi-Fi wireless audio transmission, fully synchronized audio and video Transmission;
. 5 Support for multi-node in the backbone, multi-device, multi-access, all-wireless.
Generally configured as a computer / tablet / Telephone + projector + Wireless Video + Audio + Wireless wireless microphone + wireless camera + wireless speakers (multi-channel), different device video over wireless transmission to the projector, different devices audio directly from the Wireless speakers. The whole programare All wireless design while Installation, use and maintenance are not need any professional audio knowledge.
scenarios - Conference rooms, auditoriums, classrooms need a variety of multimedia use Presentation technology environment.
Device Support - Pakite all wireless products available to support this Program.
To explain Schedule - this is the wireless backbone network + wireless node program supports a Variety of multimedia conference room input source and display, and easy use. To create a truly modern all-wireless meeting room with multi-device, Multi-access, multi-system integration.
Next:Deep research about Wireless Audio/Video Sender
- Release on :2016-06-29
PAT-260 - 2.4GHz Wireless Strong Penetration A/V Transmitter from PAKITE
PAKITE Wireless AV transmitter receiver is well knowed and professional. I had been using a 5.8 GHz audio/video system to transmit a video signal from my cable box to a television one floor below. By placing the transmitter on the floor and the receiver near the ceiling below, I was able to get the units to within about a foot of one another, separated by the floor.
The system worked well until we moved the television to the floor above the cable box and, for practical and aesthetic reasons had to separate the link by about 25 to 30 feet with the floor in between. Unfortunately, in this new location, the signal became too weak to establish a wireless link so I decided to try this PAKITE PAT-260system which is based on 2.4 GHz technology.
A 2.4 GHz signal can penetrate further into solid objects such as a wall or floor than a higher frequency 5.8 GHz signal. As a general rule of thumb, the higher the frequency, the better the video quality but the less penetration ability of the signal. So, if you have "line of sight" or LOS (i.e., no objects between the two units) at a reasonable distance then 5.8 GHz is the preferred system for acouple of reasons.
First, as noted previously, you can get a higher quality picture and, second, you can avoid interference from a range of devices(cordless phones, remote controls, wifi routers, etc.) in the crowded 2.4 GHz band. Of course, I don't have LOS and the increased distance between the transmitter and the receiver make 2.4 GHz my best option.
The system was easy to setup. It consists of two 4" X 3 1/2" unit seach of which has a 6" antenna and a power "cube" that is plugged into a wall outlet. One unit has "wireless transmitter" imprinted on the front, the other imprinted "wireless receiver". Of course, the transmitter is connected to the audio/video source while the receiver is connected to the television display. It comes with two, three-wire(red/white/yellow),audio/video connection cables with male "RCA jack" connectors. These are the cables where red and white are the two stereo audio channels and the yellow is the raw "composite" video signal. (Note: Since they both use the same round connectors, don't confuse the composite video output which carries the video signal on one cable with the red, green, blue "component" output swhich carry the three components of the video signal on three cables.)
Once set up you will need to make sure the transmitter and receiver are operating on the same channel by setting/matching a series of switches on the back of each unit. If you are getting wireless interference, then you will need to step through each channel (a total of eight channels) until you find a clear link. The link will work with any device that has a "composite" video(round yellow connector) and mono or stereo audio connections. So far it is working well for my application.
The PAT-260 av sender also supports a remote control extender which allows you to use an infrared remote to control the video source through the receiver box. Thiss ub-system uses a "reverse" link that transmits the remote signal through a separate wireless connection in which the receiver box "transmits" the remote signal to the transmitter box which then controls the video source. The system comes with an infrared transmission extension cable which is plugged into the transmitter and can be positioned infront of the IR detector on the video source.
I haven't set up this feature because we want to keep the remote control with the downstairs cable box and television. But, if needed, I would expect that we could buy a universal remote and set it up to run through the PAT-260 link.
Next:How to improve the sense of experience?
- Release on :2016-06-29
How to improve the sense of experience?
How to improve the sense of experience, it’s a big question for Chinese supplier, some times description is abstract, if clients can review it by himself that will be better.
We are a factory of wireless av sender, all of questions about products will be feedback to us, and we received many defective product from our dealer. QC Department test the defective goods one by one, but we found over 85% product is perfect, so why clients return us the perfect goods?
Following the comments is from buyer on Amazon: “
1. The procedure is quite simple; Plug in the transmitter and switch it on,connect your video and audio cables, plug your receiver in, connect audio and video leads, and then whatever source you select on the transmitting TV is duplicated on the receiving TV. It's a fantastically simple idea but one that works really well.
This parts is for explain how to use the wireless av sender, very simple to use if you can operation by yourself, but if need explain by words will be much complicated.
Chart above, the Audio Video Transmitter connect with Set Top Box
Chart above, the Audio Video Receiver connect with TV
2. Its important to make sure that the same wireless frequency is selected on both units, if you have interference you can select a different frequency to avoid interference from, say, your home network or wireless doorbell etc. A digital display is on both units.
The second parts, both transmitter and receiver in the same channel is default setting, if clients change the channels of transmitter, pls the receiver need change into the same channel, if didn’t then av sender cann’t transmit audio video, it’s very important.
transmitter receiver channel setting
3. The included remote lead is supposed to allow you to use the TV remote on the other TV but most TVs these days have built in remotes so I couldn't actually see the point of this, maybe I am missing something?
Most of clients didn’t use TV and set top box at different rooms, so their think “I can change channels at TV end, no need ir remote control.” I will tell you it’s wrong. In our daily life we change channels by the controller of set top box,not TV controller, right? So the fact is we are control the set top box not TV, if possible you can try to set TV and TV box at different rooms, test you can change channels at TV end or not.
4. The picture and sound reproduction is very good and clear. It's not only live TV that can be transmitted, it works for any source, eg set-top box, dvd player, Apple TV etc.”
Yes, it’s real time wireless av sender , no latency. Besides, our wireless av sender can transmit both digital audio video and analog audio video.
In the above comments, the clients order Model PAT-556 av sender, 5.8ghzfrequency band ; 300meter transmission range at open space;support 38/56khzfrequency of ir remote control. If any questions,welcome contact with PAKITE as free.
Next:Reviews of PAT-556 Wireless AV Transmitter Receiver
- Release on :2016-06-28
Could you imagine if PAT-266 can be used at different floor? Like the first floor to the second floor? This 2.4GHz wireless av sender(what is it?) consists of one transmitter with two RCA input and one or multiple receivers with RCA output. This device transmits vivid audio video from DVD player, DVR, CCTV camera, IPTV, Satellite receiver, Digital TV Set Top Box to any TV or monitor. It canbe used in conjunction with CCD/CCTV camera and turns into a wireless security monitoring system.
2.4 GHz av transmitter and receiver with 7 selectable channels.
Transmitter and receiver even through walls.
Long transmission range up to 1448 feet clear line-of sight.
NTSC/PAL video format available.
Built-in IR remote extender for extending control range of IR remotes up to 160 feet even through walls.
Support viewing of video programs on 2 or more TV/monitor without wires, no upper limit but all receiver should be within the transmission range.
Remotes monitoring of live video from TV box or DVD to TV..
Local area broadcasting of audio/video programs for multiple viewers even in different rooms, but all viewers in the same channels.
As to the transmission capability, the signal can go up to 1148 feet clear line-of -sight, after penetrate through 3 walls transmission range about 50 feet. With the built-in 38/56KHz IR remote extender, support all kinds of controller, it allows the user to remotely control the audio/video in the other rooms.
Moreover, it can support the IR remote control at the receiver end to realize the function of wireless control of devices from another place. So that you can enjoy freely wireless HD Audio-Video sharing data and Hi-Fi audio and video effect.
Next:Zero Interference Wireless A/V Sender
- Release on :2016-06-27
The “PAKITE PAT-556 5.8GHz Digital Wireless AV Transmitter Receiver with IR Extender” is a simple and effective way of watching programs from a satellite receiver, set top box or other in one room and a TV set in a different room.
This is achieved wireless without all the hassle of running additional cabling around the house and with the right conditions can work up to 300 meters range. A lot of home equipment, from routers to Bluetooth devices, use the 2.4GHzfrequency band but this system uses the 5.8GHz ISM frequency band which is less prone to interference from other equipment and also offers better transmission quality – a bit like a dual band router does.
It has a number of different selectable channels within the band so you may just need to find the one that works best in your location – a simple procedure.
This av sender is easy to setup. The back panels on the transmitter and receiver are clearly labeled, which makes setup easy. You simply connect the transmitter unit to the set top box and the receiver unit to the TV or monitor, you will be viewing on using the supplied cables. The Transmitter unit in effect becomes a mini TV transmitter and the Receiver unit becomes a TV tuner and works exactly the same way as your local TV transmitter in miniature.
One nice feature with the device was the IR extender, which allowed me to operate my satellite receiver from another room. The way it works is cool. You plug the IR extender into the transmitter and then put the extender in front of the transmitting device's IR sensor. This is a convenient feature because it makes sense to want to operate the device you are transmitting while watching it.
The PAT-556 av sender was supplied for evaluation and review purposes and I can offer an unbiased recommendation as a well made and effective wireless video transmitter/receiver system.
Next:PAKITE Wireless Audio Video Sender PAT-220
- Release on :2016-06-27
Zero Interference Wireless Audio/Video Sender
Do you want to watch TV in another room by wireless tv sender but without interference? No need to run cables, share sound and images from any audio/video source (e.g. DVD player, DVR, CCTV camera, IPTV, Satellite Receiver, Digital TV Set Top Box or any other A/V devices) to TV or Monitor located in the same or a different rooms.
The PAT-530 5.8GHz Audio Video Receiver and Transmitter using leading-edge wireless communications technology enabling it to send clear, stable audio/video signals from one room in the home to anotherrooms at a distance of up to 15 meters through walls, floors and ceilings. The difference with 2.4GHz models is this wireless av sender from PAKITE doesn't suffer from interference from other Wireless device (e.g. WiFi Router or cordless phones).
Simply plug the av transmitter into the output on the source device (e.g. STB,DVD...) and the receiver into an input socket of the TV . The audio and video will be share from the source device to the TV by wireless transmission. IR Remote Control make you fellmore convenience, the unit also relays signals fromremote control back to the source. so you can use controller to change channels from other room.
Wireless av sender for PAKITE PAT-530 can send high definition resolutionimages by wirelessly to your TV (requires RCA converter) allowing you to enjoy high quality audio and video on your big screen TV. The new 5.8GHz standard of transmission avoid the interference perfectly from other household products like wireless doorbell ,cordless phones and wireless internet.
Easy and quick setup. No complicated cabling required. Welcome to join wireless signal group, welcome to join PAKITE with Global User.
Next:What is wireless a/v sender?
- Release on :2016-06-27
Wireless AV Sender PAT-220
Wireless device become more and more popular at people’s daily life, like WiFi Router,Headphone, Mouse, Keyboard, those device is commonly use, now wireless doorbell, wireless ip camera, wireless av sender started to popular.
If you like shopping at online, just put key worlds “wireless av sender” at search box, whatever you search at ebay, Aamazon, or AliExpress, you will find many wireless audio/video sender in the following listing with the same feature, most of then has the same shape but different color. if you checked very carefully, you will find some of then with different brand. Yes, we accept OEM orders for regular order clients.
Here introduce PAKITE wireless av sender Model PAT-220, the feature like the following picture. This model can used between those group, like set top box and tv, cctv camera and tv, dvd and tv; Besides, no need consider the signal source is digital or analog , both digital and analog signal can be transmit by PAT-220; The transmission range up to 150 meter at open space, meet your requirements for home use, and you choose this model, you can change channels at tv send, even if the set top box and tv in the different rooms. But if you use cable connection, then you can not switch channels at tv end. Believe it or not, have a try.
The quality of wireless product can not judgement by one times test, testing environment is very import for wireless audio video transmitter and receiver. If you are End User, please check with sales which model is most suitable for you before make order, you can add the skype: pawm611 ask for support, if any questions please contact with our after sale service, if necessary our technician will help you solve this problem.
Sales just beginning, service is endless. welcome to join Pakite Brand wireless av sender with global user.
Next:Why We Choose Wireless A/V Transmitter and Receiver?
- Release on :2016-06-25
Why We Choose Wireless Audio-Video Transmitter and Receiver?
Someone may ask this question: I have cable service in my living room only. but I want to watch TV in my bedroom and don't want to run a cable. Is there a device that will let me remotely have TV in my bedroom without running a cable?
Yes, of course. It's called Wireless A/V Sender( known as wireless tv sender, Digisender, or video sender ), which can realize the audio video signal sharing in different rooms for family entertainment. The wireless av sender consists of a transmitter and a receiver. On a small scale, it works the same way as a TV antenna only instead of a local broadcast station sending a signal out to anyone who has an antenna, the TV in your living room will be the sender of the signal for the receiver in your bedroom .
PAKITE brand Wireless AV Sender is well known and professional. We have kinds of wireless av sender for different demands. It adopting advanced 2.4GHz/5.8GHz wireless transmission schemes and having advantages of long distance transmission, strong anti-interference and high mobility. By means of radio waves, it can transmit the signal from DVD player, DVR, CCTV camera, IPTV, Satellite receiver, Digital TV Set Top Box or any other A/V devices at transmitter end to TV sets in different room at receiver end. Moreover, it can support the IR remote control at the av receiver end to realize the function of wireless control of devices from another place. So that you can enjoy freely wireless HD AV sharing data and Hi-Fi audio and video effect.
My advice is to have the transmitter and receiver in as open a space as possible to avoid any interference.
Besides, if your family or neighbor were installed 2.4GHz equipment such as Wireless WIFI or cordless telephone, please choose 5.8GHz series AV transmitterand receiver.
Choosing wireless audio video transmitter and receiver, It enables you to satisfy the transmission of A/V device and digital TV STB device. It enables you to easily realize wireless sharing of SD AV data and enjoy untrammeled hi-fi audio and visual effects.
Next:Wireless IR Remote Control
- Release on :2016-06-25
Wireless IR Remote Control
Some questions comes up with wireless av sender systems, so this paragraph is for expound IR remote control function.
1: Why I need the Sender & Receiver with IR Remote Control? I have tv controller, I can change channels at tv end.
First, Why need IR Remote Control function? if you wanna change channels at tv end, you have to use PAKITE PAT-220 with IR Remote Control. Normally, we settle tv and set top box in the same room, so we can control at the tv end. but actually, you are not control tv, you are control set top box, if set top box and tv in the different room, you will find can not change channels at tv end, if you use Wireless AV Sender with IR Remote, then you can.
2. How do you control A/V devices from another room (e.g. change the channel on your cable box)? That’s where the IR extender comes in.
The IR extender is a cable that plugs into the PAKITE transmitter and has one blocks on it. You will find a blocks marked IR, and please noticed stick the IR cable in front of the device’s(DVD/STB and so on) infrared light. Then when you point the device’s own remote at the PAKITE receiver unit, which is connected to the IR extender, you can operate the device just as if you were pointing the remote at it directly.
We suggest wireless av sender with ir remote control (like PAT-220/PAT-530)for tv user, since end user need change channels at tv end, wireless av sender without ir remote control (like PAT-330/PAT-360) for cctv camera user. PAKITE would provide the best choice with low cost to clients.
Next:HDMI VS SD Wireless Audio Video Transmitter
- Release on :2016-06-25
1080p HDMI VS SD Wireless A/V Transmitter
HDMI TV and Set Top BOX had appeared on the market, clients may require 1080p output resolution HDMI wireless transmitter match with HDMI TV. At the same times, their will found he can not or hardly to find the 1080P HDMI wireless device supplier.
Here I'd like to state my personal opinion: why most of company would not produce 1080p output resolution HDMI ? 1080p HDMI already appeared on the market, it's correct, but still not the major market, that's the main reason why we would not produce Full HD AV Sender to expand the market. By the way, Pakite will launch a new HDMI wireless transmitter you never heard, it's not full HD 1080p output resolution, but it can transmit audio and video signal from the HDMI port device, such as TV(under 40 inch), set top box, DVD-player, HDCP, and so on. And it's output resolution is 720x576p(require input resolution is full HD), transmission range is 300 meters.
For technique : SD Resolution Wireless AV Sender support long rangetransmission, like PAKITE Brand PAT-260 Transmitter transmission rang is 350 meter. But if you ask for Full HD resolution, the transmission range will be very short(10 M-50 M without any hold back), and the penetrate ability will weak than SD Audio Video Transmitter, then it will be not suitable for used at different room or floor.
For Clients : Unit price of 1080p HDMI av sender will be higher than SD AV Sender, SD AV Sender unit Price approximately $40-$60 if you buy one pcs at local market, the unit price will be much cheaper if you are agents , HDMI Wireless AV Sender EXW Price based on MOQ 100 sets will be $150 -$190, it's too expensive for ender user, right?
Form Seller: $150 per sets as prime cost make 1080p HDMI market become small, it will no profit for the seller. Besides, at the first , buyer will hard to accept the cost .
That's the main reason why 1080p HDMI av sender is hardly to search. besides, company would like develop HDMI av sender if you has larger market with larger demands.
With wireless being the norm for so many of our electronic devices today, wireless av sender comes with it.
It’s also annoying when you want to put a TV in a room on the other side of the house from where your cable/satellite wiring enters it. I had this situation before I bought wireless av sender. I wanted to put a TV in my living room and bedroom, but there is a cable between set top box and tv. besides, two tv can not connect with one set top box, I am anxious to fixing this problems, but at that time only one option—running the wires along the ceiling and floorboards inside the house or running them over the roof on the outside—was desirable.
Now I found wireless av sender model PAT-260, it support used in different rooms and different floor, wireless transmission make installment step become easier, besides, also you can change channels at tv end, that a surprise, right? normally you have to change channels at set top box end if you know it very well.
You can also use the system to transmit audio and video signals wirelessly from other devices besides your cable box (e.g. DVD players, home theaters, gaming consoles) to your TV. Also, the model is marked SD resolution, but I think it's no difference with HD Wireless AV Sender.
Wireless av sender use method is very easy, You simply connect the transmitter unit to your digital box and the receiver unit to your TV. Both of them connect using RCA connectors (the ones with the red/white/yellow plugs), which are provided with the units. You then just play with the antennas to align them so the signal moves as directly as possible between the two rooms.
- Release on :2016-06-23
What is wireless av sender?
With the development of the times, electronic device becomes more and more popular, wireless device comes with it.
Everybody knows, Wireless connection bring us so many convenience. example: I like Shopping Online, Chat with my parents and friends, Review Daily News when I am sit on the sofa or some other place, but if no WiFi, I have to fix up a long cable from Internet Jack to sofa, could you imagine if no wireless device, we have to fix up by cable, four people were sitting on the sofa at the same times? So many wire were put in the ground, it will make you fell hard to move.
In a similar way, it’s pretty surprising to me that you still need a hard-wired cable or satellite connection for each TV in your house to get access to network and cable channels.
Now, I will introduce another Wireless Device, when it was founded by someone, most of people will think it's a new product, but if I told you it was on sale before WiFi Router has been widely used. So how do you think?
Ok, Let me introduce what is the real Wireless AV Sender, Wireless AV Sender also named Wireless AV Transmitter and Receiver, wireless av extender, or video sender, It's for transmit Audio Video at the same times by wireless. It come with two type of interface: RCA/AV or HDMI. (PAKITE will launch a 300 meter HDMI av senderafter October 2016). How to connect: Transmitter connect with Set Top Box(cable tv box) by AV Cable, Receiver connect with TV by AV cable, once power on, it will bework. Easy to use and install, right? And you can share tv signal from tv box to tvs without running any cables through wall from then on.
Audio Video Transmitter
Audio Video Receiver
Chart above, AV Transmitter connect with Set Top Box
Chart above, AV Receiver connect with TV
Btw, wireless av sender no need connect with Internet, Their wireless systemonly effective between transmitter and receiver.
After read the above information, you know what is wireless av sender? If still not or interesting about it, welcome contact with us.
Next:Analysis of Multimedia Video Conferencing
- Release on :2016-06-22
Analysis of Multimedia Video Conferencing
With the computer-centric multimedia technology popularization and improvement, it has brought new means and methods for the work of the Conference. Particularly in the recent years, video conferencing, distance learning, and other visual information technology fields are widely used in conference room. Multimedia conference room with its diversity of functions (such as live meetings, academic reports, training, teaching, etc.) spread rapidly. Multimedia conference room, whether to make a report, summary report, presentation products, etc., FIG interactive computer operation, text, sound, video, painting exhibition, fully mobilize the participants sensory perception, greatly improving the effect of the meeting. Conference room has entered the multimedia age!
1. Way of video conferencing
Video conferencing systems, also known as video conference system, refers to two or more individuals or groups in different places, through the transmission line and multimedia equipment, sound, images and documents mutually transfer, instant and interactive communication, system equipment to achieve the objectives of the Conference. Using video conferencing calls, except to call you can see people and language exchange, but also to see their facial expressions and gestures, so that people in different places as communication in the same room.
A / V system consists of computers, cameras, DVD, VCR (video cassette recorder), MD machines, physical booth, mixer, microphone, amplifier, speakers, digital video recorders and other A/V equipment constituted. To complete a variety of graphic information (including the use of a variety of software, DVD / CD discs, video tapes, all kinds of objects, sound) playback functions; to achieve multi-function hall live sound, broadcast, with large-screen projection systems, It provides excellent audio and visual effects. And by DVR, the entire process can be recorded in the DVR to facilitate future inquiries retrospectives.
2. Applications of video conferencing
Applications of video conference system is widely used, mainly used in various aspects of the network video conferencing, telemedicine, distance education, etc., and is widely used in government, military, business, IT, telecommunications, electricity, education, health care, securities, finance, manufacturing and other fields.
3, Benefits of video conferencing:
Ø Accelerate product development cycles and shorten time to market.
Ø Reduce travel costs.
Ø Efficient use of employee time.
Ø Provide broader, deeper face recruitment and improve the quality hiring decisions.
Ø Work / life balance, employee retention.
Ø Accelerate decision-making, improve employee satisfaction.
Ø More easily complete the remote access specialist or employee tasks.
Ø Expand their business scope.
Ø Improve and home office workers, customers, partners and supplierscommunication efficiency.
Ø Reduce hydrocarbon emissions and improve the environment, to solve the traffic congestion problem
4. Technology of video conferencing
Video conferencing system multimedia data transmission, the larger the amount of data source signal sounds and moving images, can not be transferred on the general conditions of the digital line. Based on the practical effects of the requirements,
the propagation of sound and image signal should be continuously smooth , other auxiliary functions can easy to use. Therefore, Tone image compression, communication line conditions, data sharing and other aspects of the application have high technical requirements in the sound system.
5. Trends of video conferencing
The current application of video conferencing market for all to see, but in the future there are many things need to do, in order to better apply to all areas of society. Improvements include transmission quality, integrity, cost, depending on the audio / visual. In respect of standards, Resource Reservation Protocol (RSVP) helps to avoid network congestion and ensure the transmission quality video conferencing; Although Real-time Transport Protocol (RTP) can not guarantee the integrity of data transmission, it can use the timestamp method to handle timing relationships, then the data transmission process sequence is not disrupted.
Video communication will become easier, the cost will be lower, the traditional meeting model has been far from meeting the needs of the Internet age. The video conferencing system as a support for people in real-time remote information exchanges, collaborative work system, so that members can collaborate remotely intuitive, real video/audio communication.
Modern multimedia conference room has become a modern new office building an increasingly important design category, over time, the audio and video quality and network integration are put forward a new concept. Conference room design and system integration is also a higher technical requirements.
|Spoken language||No limit||Work place||Shenzhen|
|Detailed description|| Job requirements:
1. cheerful, warm, 1.60 meters above the image of good temperament;
|Spoken language||No limit||Work place||Shenzhen|
|Detailed description||Job requirements:
1. cheerful, warm, 1.60 meters above the image of good temperament;
|Spoken language||No limit||Work place||Shenzhen|
|Detailed description||Job requirements:
1. cheerful, warm, 1.60 meters above the image of good temperament;
|Spoken language||No limit||Work place||Shenzhen|
|Detailed description||Job requirements:
1. cheerful, warm, 1.60 meters above the image of good temperament;
|Spoken language||No limit||Work place||Shenzhen|
|Detailed description||Job requirements:
|Spoken language||No limit||Work place||Shenzhen|
|Detailed description||Job requirements:
- Release on :2016-05-26
With the popularity of smart phones, smart home also catch a ride on the mobile Internet. Compared to earlier years chisel wall wiring needs to go to war conditions, today's smart home just a cell phone can be achieved. Nanjing IOT Technology Department official told reporters that the current Smart home market has entered the era of wireless cable from the era, a variety of intelligent hardware after another, and the most common approach is to be APP, the equipment and mobile phones together, side by APP mobile phone to check the status of the device, or to control the device, which the implementation of intelligent species is most common. He told reporters: "At present, the majority of people in Nanjing have a wireless network at home, but also in the hands of smart phones, the hardware basic conditions."
But reporters in the west a smart home experience museum experience with a mobile phone found after control TV, virtual keys feel inferior to physical buttons is an indisputable fact. In addition, Common entity able to use the remote control to get up, then go through to unlock the phone, download the client, open the APP, TV connection, select the desired control mode, and many other steps, even the staff of the store with them is not so handy.
- Release on :2016-03-01
Next:PAKITE has become the leading brand in the international market
Next:Pakite organization "flying dream team Departed" Staff outdoor training
- Release on :2016-05-11
Next:Shenzhen PAKITE Technology Co., Ltd.
- Release on :2016-01-07